SMC Networks SMCWPS-G manual NetWare Setup

Page 45

Subnet Mask: This option allows you to input subnet mask from the print server. The IP address must meet the IP addressing requirements of the network segment.

Gateway: This option allows you to input gateway from the print server. This IP address of gateway must meet the router or gateway to go across of the network segment.

Rendezvous Settings: Enable/Disable the Rendezvous support for Mac OS 10.

SMB Worgroup/Shared Name Setting: This option allows you to change the SMB name of print server to support the SMB printing on Windows 2000 and above.

NetWare Setup

1.Log into your NetWare file server as a Supervisor (Admin.) or equivalent.

2.Select NetWare and type in the Print server that created during PCONSOLE Select the NetWare File Server to which the print server device will be attached.

3.Click Setup, it then appears the sub-menu.

4.Click NetWare, it then as shown in the following picture.

Print Server Name: This option allows you to input print server name which configured by PSAdmin utility or PCOMSOLE program.

Polling Time: The time interval in which the print server unit polls the file server for servicing of print queues.

44

Image 45
Contents Page Internet Printer Connection and HP WEB Jetadmin Upgrading the Print Server from Unix Through TCP/IP Trademarks All contents are subject to change without prior noticeCopyright FCC Compliance Notice Radio Frequency NoticeWireless Specifications Network configurationProduct Overview Network ManagementBefore you start, you should prepare the following items Components and Features Print serverHardware Installation Wired Network with Print Server Wireless Network with Print ServerNetwork Environment Ad-Hoc PEER-to-PEER Mode Setup Operating Function Remarks System Configuration Solution TablePreparation Supported NetworksComment Installing the PSAdmin and Print Server’s Driver Software InstallationPage Page Page Page Click Add New Printer to launch Windows Add Printer Wizard Page Page Page Using PSAdmin TCP/IP Wizard WizardNetWare Wizard Manual Setup Obtain an IP address from a Dhcp server Properties -TCP/IP OptionsSpecify an IP address This value is optionalUpgrade ResetRefresh Multiple Print Queues Configuration Uninstalling the PSAdmin on Windows PCProcedure Page Windows NT/2000/XP/2003 IPP OverviewPage System Requirements HP Web JetAdmin OverviewConfirming Installation and Supply Access Installing HP Web JetAdminConfiguring and Modifying a Device Removing HP Web JetAdmin UtilityOverview Using Embedded Web ServerStatus Menu System StatusPrinter Status Wireless Status TCP/IP Status Netware Status NetWare NDS Setting General SettingsNetWare Bindery Setting AppleTalk StatusSnmp Status System Setup Setup MenuRe-type Password Wireless Setup Printer SetupBasic Settings Advanced SettingsSecurity Settings TCP/IP Setup NetWare Setup Installing Print Server on NetWare 4.x/5.x Installation Procedure Snmp SetupSelect NCF files options Select Edit AUTOEXEC.NCF file System.sysContact Snmp.snmpEnableAuthenTrapsSystem.sysName System.sysLocationAppleTalk Setup Recommended Setting Up a Macintosh ComputerPage Network Print Monitor TCP/IP Protocol Installation IPX/SPX-compatible Protocol InstallationRestart the computer NetBEUI Protocol Installation Select Printer and Properties Procedure Assigning an IP Address Basic TCP/IP Installation OverviewUse the Network Print Monitor utility Windows NT LPR Port Printing InstallationRun Add Printer Click Add PortRun Add Printer, Click Next Page Page Page Enter /Printer / Make Default Unix InstallationSCO Unix 8.0.0 Caldera Open Unix System V Release 4 UnixRedhat Linux Open Printer ConfigurationPage Printer field, choose Postscript Printer Queue Type field, choose Networked UnixChoose the model of printer and click Forward Done Upgrading Print Server Upgrading the print server from PSAdminUpgrading the print server from Unix Through TCP/IP Upgrading the print server from BrowserType tftp print server’s IP address Click Upgrade Done Power Related Problems General Troubleshooting OverviewWindows 95/98/Me/NT/2000/XP/2003 Troubleshooting Print Port Related ProblemsMulti-Segment Frame Type 802.2 Installation Select Control PanelPrint Server Reconfiguration Procedure on Windows 95/98/Me Print server Reconfiguration Procedure on Windows NTMoving the print server to a New Segment Novell NetWare Troubleshooting TCP/IP TroubleshootingMoving Your Computer to a New Segment Page Page Appendix Diagnostic Mode WirelessRendezvous with Mac OS X Click Printer Setup Utility from the bottom toolbox of Mac Page Page SMB Printing with Windows XP Page Page Page Perform a Factory Default Reset Button Reboot the Print serverDhcp client off IP address Frequently Asked Questions Question BQuestion C Question E Question DQuestion F Question GPanasonic KX-P6100/6300/6500 Additional Installation InstructionsTesla