SMC Networks SMCWPS-G manual Network Print Monitor

Page 52

6. Network Print Monitor

Preparation

The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under Windows 95/98/Me. Please make sure that the following steps have been completed before proceeding with installation under Windows PC.

Select A Desired Protocol

TCP/IP

The TCP/IP Protocol must be installed. For further information, please read “TCP/IP Protocol Installation” section in this chapter.

Note: If TCP/IP protocol is chosen, please refer to “Assigning an IP Address to the print server” section later in this chapter.

IPX/SPX

The IPX/SPX-compatible Protocol must be installed. For further information, please read “IPX/SPX-compatible Protocol Installation” section in this chapter.

NetBEUI

The NetBEUI protocol must be installed. For further information, please read “NetBEUI Protocol Installation” section in this chapter.

51

Image 52

Contents Page Internet Printer Connection and HP WEB Jetadmin Upgrading the Print Server from Unix Through TCP/IP All contents are subject to change without prior notice TrademarksCopyright FCC Compliance Notice Radio Frequency NoticeNetwork configuration Wireless SpecificationsProduct Overview Network ManagementComponents and Features Print server Before you start, you should prepare the following itemsHardware Installation Wireless Network with Print Server Wired Network with Print ServerNetwork Environment Ad-Hoc PEER-to-PEER Mode Configuration Solution Table Setup Operating Function Remarks SystemPreparation Supported NetworksComment Software Installation Installing the PSAdmin and Print Server’s DriverPage Page Page Page Click Add New Printer to launch Windows Add Printer Wizard Page Page Page Using PSAdmin Wizard TCP/IP WizardNetWare Wizard Manual Setup Properties -TCP/IP Options Obtain an IP address from a Dhcp serverSpecify an IP address This value is optionalReset UpgradeRefresh Uninstalling the PSAdmin on Windows PC Multiple Print Queues ConfigurationProcedure Page IPP Overview Windows NT/2000/XP/2003Page HP Web JetAdmin Overview System RequirementsInstalling HP Web JetAdmin Confirming Installation and Supply AccessConfiguring and Modifying a Device Removing HP Web JetAdmin UtilityUsing Embedded Web Server OverviewStatus Menu System StatusPrinter Status Wireless Status TCP/IP Status Netware Status General Settings NetWare NDS SettingNetWare Bindery Setting AppleTalk StatusSnmp Status Setup Menu System SetupRe-type Password Printer Setup Wireless SetupAdvanced Settings Basic SettingsSecurity Settings TCP/IP Setup NetWare Setup Installing Print Server on NetWare 4.x/5.x Snmp Setup Installation ProcedureSelect NCF files options Select Edit AUTOEXEC.NCF file Snmp.snmpEnableAuthenTraps System.sysContactSystem.sysName System.sysLocation AppleTalk Setup Setting Up a Macintosh Computer RecommendedPage Network Print Monitor IPX/SPX-compatible Protocol Installation TCP/IP Protocol InstallationRestart the computer NetBEUI Protocol Installation Select Printer and Properties Procedure Basic TCP/IP Installation Overview Assigning an IP AddressWindows NT LPR Port Printing Installation Use the Network Print Monitor utilityRun Add Printer Click Add PortRun Add Printer, Click Next Page Page Page Unix Installation Enter /Printer / Make DefaultSCO Unix 8.0.0 Caldera Open Unix System V Release 4 UnixOpen Printer Configuration Redhat LinuxPage Queue Type field, choose Networked Unix Printer field, choose Postscript PrinterChoose the model of printer and click Forward Done Upgrading the print server from PSAdmin Upgrading Print ServerUpgrading the print server from Browser Upgrading the print server from Unix Through TCP/IPType tftp print server’s IP address Click Upgrade Done General Troubleshooting Overview Power Related ProblemsPrint Port Related Problems Windows 95/98/Me/NT/2000/XP/2003 TroubleshootingMulti-Segment Frame Type 802.2 Installation Select Control PanelPrint server Reconfiguration Procedure on Windows NT Print Server Reconfiguration Procedure on Windows 95/98/MeMoving the print server to a New Segment TCP/IP Troubleshooting Novell NetWare TroubleshootingMoving Your Computer to a New Segment Page Page Diagnostic Mode Wireless AppendixRendezvous with Mac OS X Click Printer Setup Utility from the bottom toolbox of Mac Page Page SMB Printing with Windows XP Page Page Page Reset Button Reboot the Print server Perform a Factory DefaultDhcp client off IP address Question B Frequently Asked QuestionsQuestion C Question D Question EQuestion F Question GAdditional Installation Instructions Panasonic KX-P6100/6300/6500Tesla