SMC Networks SMCWPS-G Windows NT LPR Port Printing Installation, Run Add Printer, Click Add Port

1.Use the Network Print Monitor utility.

2.Manually specify (using DOS commands or UNIX text-mode commands. This applies to Windows NT/2000/XP/2003 and UNIX systems).

Note: The Network Print Monitor can only search for the print server(s) over the same network segment the Windows NT/2000/XP/2003/UNIX computer is located. You would like to install a print server on a different network segment.

DHCP

The print server supports DHCP feature, allowing the print server to obtain an IP address and related TCP/IP settings automatically from a DHCP server. While the print server supports DHCP, we strongly recommend you manually specify a fixed IP address to the print server. By default, the print server’s DHCP function is enabled.

Windows NT LPR Port Printing Installation

1.Click Start, point to Settings, and select Printer.

2.Run Add Printer.

3.The Add Printer Wizard screen will appear, Select My Computer and click Next.

4.Click Add Port.

5.From the Printer Ports box as shown in the following picture, select the LPR Port.

6.The Add LPR compatible printers box will then appear as shown in the following picture. Type in the IP address assigned to the print server in the Name or address of server providing lpd box.

57