SMC Networks SMCWPS-G manual TCP/IP Setup

Page 44

Authentication Type: Open System, Shared Key or WPA/WPA2.

Encryption: WEP-64/128bit for Open System/Shared Key. Or TKIP/CCMP for WPA/WPA2.

TCP/IP Setup:

1.Click Setup, it then appears the sub-menu.

2.Click TCP/IP, it then as shown in the following picture.

DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a DHCP/BOOTP server on your network. This option allows the print server to obtain IP-related settings automatically from your DHCP server.

IP Address: This option allows you to input IP address from the print server. The IP address must meet the IP addressing requirements of the network segment.

Note:

On the TCP/IP Setup screen, specify a fixed IP address is highly recommended.

43

Image 44

Contents Page Internet Printer Connection and HP WEB Jetadmin Upgrading the Print Server from Unix Through TCP/IP All contents are subject to change without prior notice TrademarksCopyright FCC Compliance Notice Radio Frequency NoticeNetwork configuration Wireless SpecificationsProduct Overview Network ManagementComponents and Features Print server Before you start, you should prepare the following itemsHardware Installation Network Environment Wired Network with Print ServerWireless Network with Print Server Ad-Hoc PEER-to-PEER Mode Configuration Solution Table Setup Operating Function Remarks SystemPreparation Supported NetworksComment Software Installation Installing the PSAdmin and Print Server’s DriverPage Page Page Page Click Add New Printer to launch Windows Add Printer Wizard Page Page Page Using PSAdmin Wizard TCP/IP WizardNetWare Wizard Manual Setup Properties -TCP/IP Options Obtain an IP address from a Dhcp serverSpecify an IP address This value is optionalRefresh UpgradeReset Procedure Multiple Print Queues ConfigurationUninstalling the PSAdmin on Windows PC Page IPP Overview Windows NT/2000/XP/2003Page HP Web JetAdmin Overview System RequirementsInstalling HP Web JetAdmin Confirming Installation and Supply AccessConfiguring and Modifying a Device Removing HP Web JetAdmin UtilityUsing Embedded Web Server OverviewStatus Menu System StatusPrinter Status Wireless Status TCP/IP Status Netware Status General Settings NetWare NDS SettingNetWare Bindery Setting AppleTalk StatusSnmp Status Setup Menu System SetupRe-type Password Printer Setup Wireless SetupSecurity Settings Basic SettingsAdvanced Settings TCP/IP Setup NetWare Setup Installing Print Server on NetWare 4.x/5.x Select NCF files options Select Edit AUTOEXEC.NCF file Installation ProcedureSnmp Setup Snmp.snmpEnableAuthenTraps System.sysContactSystem.sysName System.sysLocationAppleTalk Setup Setting Up a Macintosh Computer RecommendedPage Network Print Monitor Restart the computer TCP/IP Protocol InstallationIPX/SPX-compatible Protocol Installation NetBEUI Protocol Installation Select Printer and Properties Procedure Basic TCP/IP Installation Overview Assigning an IP AddressWindows NT LPR Port Printing Installation Use the Network Print Monitor utilityRun Add Printer Click Add PortRun Add Printer, Click Next Page Page Page Unix Installation Enter /Printer / Make DefaultSCO Unix 8.0.0 Caldera Open Unix System V Release 4 UnixOpen Printer Configuration Redhat LinuxPage Queue Type field, choose Networked Unix Printer field, choose Postscript PrinterChoose the model of printer and click Forward Done Upgrading the print server from PSAdmin Upgrading Print ServerType tftp print server’s IP address Upgrading the print server from Unix Through TCP/IPUpgrading the print server from Browser Click Upgrade Done General Troubleshooting Overview Power Related ProblemsPrint Port Related Problems Windows 95/98/Me/NT/2000/XP/2003 TroubleshootingMulti-Segment Frame Type 802.2 Installation Select Control PanelMoving the print server to a New Segment Print Server Reconfiguration Procedure on Windows 95/98/MePrint server Reconfiguration Procedure on Windows NT Moving Your Computer to a New Segment Novell NetWare TroubleshootingTCP/IP Troubleshooting Page Page Diagnostic Mode Wireless AppendixRendezvous with Mac OS X Click Printer Setup Utility from the bottom toolbox of Mac Page Page SMB Printing with Windows XP Page Page Page Reset Button Reboot the Print server Perform a Factory DefaultDhcp client off IP address Question C Frequently Asked QuestionsQuestion B Question D Question EQuestion F Question GAdditional Installation Instructions Panasonic KX-P6100/6300/6500Tesla