SMC Networks SMCWPS-G manual Using PSAdmin

Page 21

17.Go to General; click Print Test Page to verify the configuration.

18.Done.

Note:

If you want to install more print servers, start setup wizard from your Windows Start menu: start -> All Programs -> Network Print Server -> PSWizard and repeat the installation procedure.

Using PSAdmin

After the software of setup CD is successfully installed, starts PSAdmin utility from your Windows Start menu: start -> All Programs -> Network Print Server -> PSAdmin. The screen will then appear as follow picture.

All print server(s) feature Novell NetWare function on the LAN will be displayed along with their respective device name, MAC Address, print server name, firmware version, and status. The terms are defined as follows:

Device Name: The name of the print server hardware used for identification purposes.

MAC Address: The Ethernet address of the print server.

Print server Name: The print server to which the device is attached.

Version: The firmware version of the print server.

Status: To come up a Printer’s status presently.

20

Image 21
Contents Page Internet Printer Connection and HP WEB Jetadmin Upgrading the Print Server from Unix Through TCP/IP Trademarks All contents are subject to change without prior noticeCopyright FCC Compliance Notice Radio Frequency NoticeWireless Specifications Network configurationProduct Overview Network ManagementBefore you start, you should prepare the following items Components and Features Print serverHardware Installation Wired Network with Print Server Wireless Network with Print ServerNetwork Environment Ad-Hoc PEER-to-PEER Mode Setup Operating Function Remarks System Configuration Solution TablePreparation Supported NetworksComment Installing the PSAdmin and Print Server’s Driver Software InstallationPage Page Page Page Click Add New Printer to launch Windows Add Printer Wizard Page Page Page Using PSAdmin TCP/IP Wizard WizardNetWare Wizard Manual Setup Obtain an IP address from a Dhcp server Properties -TCP/IP OptionsSpecify an IP address This value is optionalUpgrade ResetRefresh Multiple Print Queues Configuration Uninstalling the PSAdmin on Windows PCProcedure Page Windows NT/2000/XP/2003 IPP OverviewPage System Requirements HP Web JetAdmin OverviewConfirming Installation and Supply Access Installing HP Web JetAdminConfiguring and Modifying a Device Removing HP Web JetAdmin UtilityOverview Using Embedded Web ServerStatus Menu System StatusPrinter Status Wireless Status TCP/IP Status Netware Status NetWare NDS Setting General SettingsNetWare Bindery Setting AppleTalk StatusSnmp Status System Setup Setup MenuRe-type Password Wireless Setup Printer SetupBasic Settings Advanced SettingsSecurity Settings TCP/IP Setup NetWare Setup Installing Print Server on NetWare 4.x/5.x Installation Procedure Snmp SetupSelect NCF files options Select Edit AUTOEXEC.NCF file System.sysContact Snmp.snmpEnableAuthenTrapsSystem.sysName System.sysLocationAppleTalk Setup Recommended Setting Up a Macintosh ComputerPage Network Print Monitor TCP/IP Protocol Installation IPX/SPX-compatible Protocol InstallationRestart the computer NetBEUI Protocol Installation Select Printer and Properties Procedure Assigning an IP Address Basic TCP/IP Installation OverviewUse the Network Print Monitor utility Windows NT LPR Port Printing InstallationRun Add Printer Click Add PortRun Add Printer, Click Next Page Page Page Enter /Printer / Make Default Unix InstallationSCO Unix 8.0.0 Caldera Open Unix System V Release 4 UnixRedhat Linux Open Printer ConfigurationPage Printer field, choose Postscript Printer Queue Type field, choose Networked UnixChoose the model of printer and click Forward Done Upgrading Print Server Upgrading the print server from PSAdminUpgrading the print server from Unix Through TCP/IP Upgrading the print server from BrowserType tftp print server’s IP address Click Upgrade Done Power Related Problems General Troubleshooting OverviewWindows 95/98/Me/NT/2000/XP/2003 Troubleshooting Print Port Related ProblemsMulti-Segment Frame Type 802.2 Installation Select Control PanelPrint Server Reconfiguration Procedure on Windows 95/98/Me Print server Reconfiguration Procedure on Windows NTMoving the print server to a New Segment Novell NetWare Troubleshooting TCP/IP TroubleshootingMoving Your Computer to a New Segment Page Page Appendix Diagnostic Mode WirelessRendezvous with Mac OS X Click Printer Setup Utility from the bottom toolbox of Mac Page Page SMB Printing with Windows XP Page Page Page Perform a Factory Default Reset Button Reboot the Print serverDhcp client off IP address Frequently Asked Questions Question BQuestion C Question E Question DQuestion F Question GPanasonic KX-P6100/6300/6500 Additional Installation InstructionsTesla