Seagate ST19171DC, ST19171W, ST19171N Regulatory agency compliance, Electromagnetic susceptibility

Page 10

8	Barracuda 9 Installation Guide, Rev. B

Regulatory agency compliance

Electromagnetic susceptibility

As a component assembly, the drive is not required to meet any susceptibility performance requirements. It is the responsibility of those integrating the drive within their systems to perform those tests required and design their system to ensure that equipment operating in the same system as the drive or external to the sys- tem does not adversely affect the performance of the drive. See DC power requirements on page 17.

Electromagnetic compliance

Seagate uses an independent laboratory to confirm compliance to the directives/standard(s) for CE Marking and C-Tick Marking. The drive was tested in a representative system for typical appli- cations. The selected system represents the most popular char- acteristics for test platforms. The system configurations include:

•486, Pentium, and PowerPC microprocessors

•3.5-inch floppy disc drive

•Keyboard

•Monitor/display

•Printer

•External modem

•Mouse

Although the test system with this Seagate model complies to the directives/standard(s), we cannot guarantee that all systems will comply. The computer manufacturer or system integrator shall confirm EMC compliance and provide CE Marking and C- Tick Marking for their product.

Image 10

Contents ST19171N/W/WD/WC/DC Contents Preface Electrostatic discharge protectionImportant safety information and precautions Page Wichtige Sicherheitshinweise Barracuda 9 Installation Guide, Rev. B Barracuda 9 Installation Guide, Rev. B Page Regulatory agency compliance Electromagnetic susceptibilityElectromagnetic compliance for the European Union Seagate technical support services Online servicesSeagate CompuServe forum FAX services SeaFAXDirect-support services Seagate technical supportCustomer service centers Manufacturer’s representativesGeneral description Characteristics ST19171 OD DC Barracuda 9 Installation Guide, Rev. B Page Drive models General informationScsi ID jumpers Drive terminationScsi bus termination Circuits and data path widths Terminator powerProviding adequate cooling Barracuda 9 Installation Guide, Rev. B Kühlung des Systems Suggested air flow Abbildung 3. Empfohlener Luftstromverlauf Mounting the drive and connecting cables Installation des Laufwerkes und Anschluß der KabelBarracuda 9 Installation Guide, Rev. B DC power connector Abbildung 4. Gleichstromanschluß Hinweis Formatting the drive Quick reference desktop system notesSetting the Scsi ID jumpers DrivesTerminating the drive Terminating the driveSetting terminator power jumpers Other applicable jumper options Several other jumper options are available as illustratedWD drives Using the J1 auxiliary jumper block Terminating the drive ST19171W shown ST19171W Other option jumpers are available as illustrated below WC/DC drives Applicable jumper options Option jumpers are available as illustrated belowPage Page