Barracuda 9 Installation Guide, Rev. B | 31 |
tem einbauen. Die daraus u.U. resultierende verstärkte elektromagnetische Strahlung fällt in den Zuständigkeits- bereich des Systemdesigners.
5.Replace the host system’s cover.
5.Setzen Sie das Gehäuseoberteil des
Formatting the drive
Warning. Formatting a drive erases all user data. Be sure that you understand this principle before formatting any hard disc drive. It is not necessary to format a drive that previously has been used to store data, unless your intention is to erase all user data.
1.Turn on DC power.
2.Boot the system from a system floppy disc or from a previ- ously installed hard disc drive if there is one.
3.Format the disc drive. Barracuda 9 disc drives are designed to operate with a variety of operating systems. Please refer to your system or SCSI controller manual for information about formatting and setting up the drive. Some quick desk- top system notes are provided below.
Quick reference desktop system notes
Note. Refer to your system or utility manual for detailed instruc- tions)
•DOS. Set the drive type in CMOS to “ Zero,” “None,” or “No hard drive installed.” Use FDISK.exe and FORMAT.exe.
•Macintosh. Use a