Seagate ST19171WD, ST19171DC, ST19171N, ST19171WC manual Characteristics ST19171

Page 18

16

Barracuda 9 Installation Guide, Rev. B

Characteristics

ST19171

Interface

SCSI Fast-20 (also called

 

Ultra SCSI)1

Capacity

 

Unformatted

11.7 Gbytes

Formatted2

9.1 Gbytes

Recording

 

Cylinders (user)

5,274

Read/write data heads

20

Servo heads

Embedded

Seek time3

 

Average read

9.7 msec

Average write

10.7 msec

Disc rotation

 

RPM

7,200 ±0.5%

Average latency

4.17 msec

Internal transfer rate

80 to 124

(Mbits/sec, variable with zone)

Max sync. SCSI transfer rate

N

20 Mbytes/sec

W/WD/WC/DC

40 Mbytes/sec

Multi-segmented cache

512 Kbytes

 

2,048 Kbytes (optional)

1Can also be operated according to SCSI-1 and SCSI-2 proto- cols.

2Standard factory units are formatted as follows:

512 data bytes per sector

9 spare sectors per cylinder

1 cylinder at the inner track reserved for spares

3Includes on-board controller overhead.

Image 18
Contents ST19171N/W/WD/WC/DC Contents Preface Electrostatic discharge protectionImportant safety information and precautions Page Wichtige Sicherheitshinweise Barracuda 9 Installation Guide, Rev. B Barracuda 9 Installation Guide, Rev. B Page Regulatory agency compliance Electromagnetic susceptibilityElectromagnetic compliance for the European Union Seagate technical support services Online servicesSeagate CompuServe forum FAX services SeaFAXDirect-support services Seagate technical supportCustomer service centers Manufacturer’s representativesGeneral description Characteristics ST19171 OD DC Barracuda 9 Installation Guide, Rev. B Page Drive models General informationScsi ID jumpers Drive terminationScsi bus termination Terminator power Circuits and data path widthsProviding adequate cooling Barracuda 9 Installation Guide, Rev. B Kühlung des Systems Suggested air flow Abbildung 3. Empfohlener Luftstromverlauf Mounting the drive and connecting cables Installation des Laufwerkes und Anschluß der KabelBarracuda 9 Installation Guide, Rev. B DC power connector Abbildung 4. Gleichstromanschluß Hinweis Formatting the drive Quick reference desktop system notesSetting the Scsi ID jumpers DrivesTerminating the drive Terminating the driveSetting terminator power jumpers Other applicable jumper options Several other jumper options are available as illustratedWD drives Using the J1 auxiliary jumper block Terminating the drive ST19171W shown ST19171W Other option jumpers are available as illustrated below WC/DC drives Applicable jumper options Option jumpers are available as illustrated belowPage Page