Seagate ST34501N, ST34501WD, ST34501DC, ST34501WC manual Mounting configuration dimensions

Cheetah 4LP Installation Guide, Rev. B 37

[1] A

L

F

D

G

E

.050 in. (1.27mm) minimum clearance

B

[2]
K	J2

J

J6LED

H

[4]

M

[3]

C

Notes:

[1]Mounting holes three on each side, 6-32 UNC. Max screw length into side of drive 0.15 in. (3.81 mm). Screw tightening torque 6.0 in-lb (.675 NM) max with minimum thread engagement of 0.12 in. (3.05 mm).

[2]Mounting holes four on bottom, 6-32 UNC. Max screw length into bottom of drive 0.15 in. (3.81 mm). Screw tightening torque 6.0 in-lb (.675 NM) max with minimum thread engagement of 0.12 in. (3.05 mm).

[3]Power and interface connectors can extend past the “A” dimension by 0.040 in (1.02mm).

[4]Decorative front panel.

	Inches			Millimeters
A	5.750	±	0.010	146.05	±	.25
B	4.000	±	0.010	101.60	±	.25
C	1.000	+	0.026	25.40	±	.38
		–	0.010
D	0.625	±	0.020	15.87	±	.50
E	4.000	±	0.005	101.60	±	.13
F	0.250	±	0.005	6.35	±	.13
G	2.375	±	0.010	60.32	±	.25
H	3.750	±	0.010	95.25	±	.25
J	2.370	±	0.010	60.20	±	.25
K	1.750	±	0.020	44.45	±	.50
L	1.100	±	0.010	27.94	±	.25
M	4.100	±	0.010	104.14	±	.25

Figure 6. Mounting configuration dimensions