Seagate ST34501WC, ST34501WD, ST34501DC, ST34501N manual Drive characteristics

Page 18

SCSI Fast-20 (also called Ultra SCSI1)

6,526

10,033 r/min ±0.5%

2.99 msec

7.7 msec

8.7 msec

122 to 177 Mbits/sec

512 Kbytes

16	Cheetah 4LP Installation Guide, Rev. B

Table 1. Drive characteristics

Characteristics of the various drives covered by this manual are given in the following tables.

Interface type:

Cylinders (user accessable): Disk rotation:

Avg. latency:

Seek time2

Average read (typical) Average write (typical)

Internal transfer rate (variable with zone)

Multi-segmented cache

1Also operates per SCSI-1/SCSI-2/SCSI-3 protocols.

2Includes on-board controller overhead.

Image 18

Contents ST34501N/W/WC/WD/DC Contents Preface Electrostatic discharge protection Important safety information and precautions Cheetah 4LP Installation Guide, Rev. B Wichtige Sicherheitshinweise Cheetah 4LP Installation Guide, Rev. B Page Regulatory agency compliance Electromagnetic susceptibilityElectromagnetic compliance Electromagnetic compliance for the European Union Australian C-TickSeagate technical support services Online servicesSeagate CompuServe forum FAX services SeaFAXDirect-support services Seagate technical supportCustomer service centers Manufacturer’s representativesGeneral description Drive characteristics Additional drive characteristics DC power requirements Amps ST34501 WC models WD, DC models +12V8 +5V8 Voltage regulation5 ± 5% ± 5%2Dimensions of the drive Drive models General informationScsi ID jumpers Drive termination Terminator power Circuits and data path widthsCable characteristics for single-ended circuits Pin I/O connection to drive Multiple drive connection to host adapter Multiple-drive connection to host adapter Scsi I/O Providing adequate cooling Kühlung des Systems Suggested air flow Abbildung 4. Empfohlener LuftstromverlaufMounting the drive and connecting cables Installation des Laufwerkes und Anschluß der KabelPage Pin Power Pin GleichstromHinweis Cheetah 4LP Installation Guide, Rev. B Mounting configuration dimensions Formatting the drive Quick reference desktop system notesSetting the Scsi ID jumpers Setting the Scsi ID on model N drivesTerminating the drive Terminating the driveSetting terminator power jumpers Other applicable jumper options Additional jumper optionsWD drives Model W and WD drive alternate ID select and LED connection Terminating the drive W model shown Drive Front Other option jumpers are available as illustrated below WC/DC drives Applicable jumper options Jumper optionsDrive Active indicator Drive Active LED indicator connectionsPage Page