1Ultra DMA mode 1 is supported.
2Ultra DMA mode 2 is supported.
3Ultra DMA mode 3 is supported.
4Ultra DMA mode 4 is supported.
8Ultra DMA mode 0 is currently active.
9Ultra DMA mode 1 is currently active.
10Ultra DMA mode 2 is currently active.
11Ultra DMA mode 3 is currently active.
12Ultra DMA mode 4 is currently active.
13Ultra DMA mode 5 is currently active.
Bit | Word 93 |
131 =
4.2.6Set Features command
This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an inter- rupt. If the value in the register does not represent a feature that the drive supports, the command is aborted.
Momentus 7200 FDE.1 SATA Product Manual, Rev. A | 39 |