Seagate ST9320424ASG, ST980414ASG 7 S.M.A.R.T. commands, Code in features register A.R.T. command

Page 47

4.2.7S.M.A.R.T. commands

S.M.A.R.T. provides near-term failure prediction for disc drives. When S.M.A.R.T. is enabled, the drive moni- tors predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is likely, S.M.A.R.T. makes a status report available to the host. Not all failures are predictable. S.M.A.R.T. predictability is limited to the attributes the drive can monitor. For more information on S.M.A.R.T. commands and implementation, see the Draft ATA-5 Standard.

SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4H) that elimi- nates unnecessary drive returns. The diagnostic software ships with all new drives and is also available at: http://seatools.seagate.com.

This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T. to enable this feature. The table below shows the S.M.A.R.T. command codes that the drive uses.

Table 11: S.M.A.R.T. commands

Code in features register	S.M.A.R.T. command

D0H	S.M.A.R.T. Read Data

D1H	Vendor-specific

D2H	S.M.A.R.T. Enable/Disable Attribute Autosave

D3H	S.M.A.R.T. Save Attribute Values

D4H	S.M.A.R.T. Execute Off-line Immediate (runs DST)

D7H	Vendor-specific

D8H	S.M.A.R.T. Enable Operations

D9H	S.M.A.R.T. Disable Operations

DAH	S.M.A.R.T. Return Status

Note. If an appropriate code is not written to the Features Register, the command is aborted and 0x04 (abort) is written to the Error register.

Momentus 7200 FDE.1 SATA Product Manual, Rev. A

41

Image 47

Contents Momentus 7200 FDE.1 Sata Page Contents Compatibility summary Seagate Technology support servicesSerial ATA interface List of Figures Page System requirements IntroductionFDE benefits Security feature matrixFDE drive feature list About Momentus 7200 FDE.1 Sata disc drivesDrive state upon shipment Momentus 7200 FDE.1 Sata Product Manual, Rev. a Specification summary table Drive specificationsSystem will display the warranty information for your drive Cylinders Read/write heads Sectors per track 16,383 Default logical geometryLBA mode Formatted capacityRecording and interface technology Physical characteristicsDrive specification Physical organizationTime to ready Typical Max @ 25C Seek timeStart/stop times Typical seek times msec ReadPower specifications Voltage tolerance Typical current profileConducted noise Idle mode Power-management modesPower management modes Active modeEnvironmental specifications Vibration ShockOperating shock Nonoperating shockIdle Performance seek AcousticsElectromagnetic immunity Test for Prominent Discrete Tones PDTsPerformance Reference Test Description Level Standard Reliability Free Fall Protection featureSafety certification Measurement type SpecificationFCC verification Electromagnetic compatibilityKorean RRL Australian C-Tick N176Page China Restriction of Hazardous Substances RoHS Directive Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensionsMomentus 7200 FDE.1 Sata drive label example Drive integrationConsumer usage Security Erase--ATA security commandsDrive installation Secure Erase procedurePage Serial ATA interface Pin Function Definition Serial ATA connector pin definitionsSignal ATA Security Erase Unit bits Word ContentATA Security policy exceptions Ident Value BIT set Bit Description DriveTrust Mode supportDriveTrust Identify Full Disc Encryption Identify Full Disc Encryption supportNormal Commands Supported ATA commandsSupported commands Read LOG EXT SET MAX Freeze Lock ATA Security API DriveTrust Security API Code Command Locked Unlocked FrozenWord Description Value Identify Device commandXxxxH Description if bit is set to Bit Word Bit Word Ultra DMA mode 0 is supportedBit Word Set Features command0CH Set Features command valuesCode in features register A.R.T. command 7 S.M.A.R.T. commandsM.A.R.T. commands Momentus 7200 FDE.1 Sata Product Manual, Rev. a Tested Bios versions with Windows XP SP2 Installation considerationsSystem Compatibility using WIndows XP SP2 Bios versions tested in ATA Security modeAMD Phoenix Award Dell AMI VVPGI635 DriveTrust compatibility verification DriveTrust compatibility BiosTian YI F30A ATA Operating system versions tested Manufacturer Version/Release Compatibility test configurationsSupported operating systems Technical Support InternetPresales Support Data Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE TPI Momentus 7200 FDE.1 Sata Product Manual, Rev. a Page Seagate Technology LLC