Medalist SL Family Installation Guide, November 1995 | 9 |
| | |
Caution. The cable and connector bond is delicate. Pulling the cable to remove the connector may damage the cable.
Attach an interface connector to the drive. If your interface con- nector has a key, it will plug into the drive only one way. Make sure that you do not bend the pins when you attach the cable.
Attach an interface-connector to the hard-disc controller connec- tor on the motherboard or host adapter (see your system user’s guide or host adapter user’s guide to determine the location of pin 1). Make sure that pin 1 is aligned with pin 1 on the drive.
Cable-select installation: If your computer uses cable-select for connection, refer to its user’s guide to determine which interface connector is used for the master and which is used for the slave.
2. Attach a power-supply cable to the drive.
Cable stripe
Figure 3. Attaching cables to the drive
