6 | Medalist SL Family Installation Guide, November 1995 |
Options jumper block
pin 1
Figure 1. Drive connectors
pin 1
Interface connector
Standard
power connector
1 | 2 | 3 | 4 | Circuit |
|
|
|
| |
|
|
|
| board |
|
|
|
| +5V |
+5V return
+12V return
+12V
Master with slave present. Use this configuration if the drive is the first of two drives in your system. The master drive is Drive 0 in the System Setup record.
Slave. Use this configuration if the drive is the second drive in the system. The slave is Drive 1 in the System Setup record.