Seagate ST3300831ACE manual Reliability, Agency certification, Safety certification, Korean RRL

Page 22

Voltage dips, interrupts

0% open, 5 seconds

C

EN 61000-4-11: 94

 

0% short, 5 seconds

C

 

 

40%, 0.10 seconds

C

 

 

70%, 0.01 seconds

B

 

 

 

 

 

2.11

Reliability

 

 

 

Nonrecoverable read errors

1 per 1014 bits read, max.

Contact start-stop cycles

50,000 cycles

 

 

(at nominal voltage and temperature, with 60 cycles per hour and a 50% duty cycle)

 

 

Service Life

5 Years

 

 

Preventive maintenance

None required

 

 

 

2.12Agency certification

2.12.1Safety certification

The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections of IEC950 and EN 60950 as tested by TUV North America.

2.12.2Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec- tromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

Korean RRL

If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with para- graph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibil- ity (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recog- nized lab.

• EUT name (model numbers): ST3400832ACE, ST3300831ACE, ST3250823ACE and ST3200826ACE.

• Certificate numbers:

ST3400832ACE

E-H011-04-4534 (B)

 

ST3300831ACE

E-H011-04-4534 (B)

 

ST3250823ACE

E-H011-04-4533 (B)

 

ST3200826ACE

E-H011-04-4533 (B)

•Trade name or applicant: Seagate Technology

•Manufacturing date: November 2004

•Manufacturer/nationality: Singapore and China

12

DB35 Series Product Manual, Rev. B

Page 21 Page 23
Image 22
Page 21 Page 23
Contents DB35 Series Page DB35 Series Page Revision status summary sheet DB35 Series Product Manual, Rev. B Contents DB35 Series Product Manual, Rev. B List of Figures Viii DB35 Series Product Manual, Rev. B Introduction DB35 SeriesDB35 Series Product Manual, Rev. B Specification summary table Drive specificationsDrive specifications Altitude, nonoperating To 12,192 m Below mean sea level, max Formatted capacity LBA modeRecording and interface technology Start/stop times Physical characteristicsSeek time Typical seek timesPower specifications Conducted noise Typical current profileVoltage tolerance Environmental specifications Humidity Relative humidity Temperature gradientWet bulb temperature AltitudeNonoperating vibration AcousticsElectromagnetic immunity Operating acousticsAgency certification Safety certificationReliability Electromagnetic compatibilityFCC verification Environmental protectionAustralian C-Tick N176 European Union Restriction of Hazardous Substances RoHSDB35 Series Product Manual, Rev. B Configuring and mounting the drive Handling and static discharge precautionsBreather filter hole precautions Breather filter hole locationDrive as master with a non-ATA-compatible slave Jumper settingsMaster/slave configuration Cable-select optionDrive mounting Ultra ATA/100 cableMounting dimensions-top, side and end view DB35 Series Product Manual, Rev. B ATA interface signals and connector pins ATA interfaceSupported ATA commands Command name Command code in hexF6H Identify Device command Word Description ValueXxxxH Description if bit is set to Bit Word Set Features command 4 S.M.A.R.T. commandsCode in features Register A.R.T. command Presales Support Seagate Technology support servicesInternet MySeagate Reseller.seagate.com Technical SupportWarranty Service Authorized Service CentersAmericas SEAGATE2 +1-405-324-47002 +1-405-324-3339 Call Center Toll-free Direct dialAmericas +1-405-324-47301 +1-405-324-4704 Call Center Toll-free Direct dial FAX / E-mailCall Center Presales and Technical Support Warranty Service FAX Services-All Europe toll callToll-Free Support Numbers Asia/Pacific Support Services DB35 Series Product Manual, Rev. B Index NumericsPage Page DB35 Series Product Manual, Rev. B Page Seagate Technology LLC
Top Page Image Contents