Seagate ST3200826ACE, ST3250823ACE, ST3300831ACE manual Description if bit is set to Bit Word

Page 36

Word	Description	Value

100–103	Total number of user-addressable LBA sectors available	ST3400832ACE = 781,422,768
	(see Section 2.2 for related information)	ST3300831ACE = 586,072,368
	(see Section 2.2 for related information)	ST3250823ACE = 488,397,168
	These words are required for drives that support the 48-bit addressing	ST3200826ACE = 390,721,968
	feature. Maximum value: 0000FFFFFFFFFFFFh.

104–127	ATA-reserved	0000H

128	Security status	0001H

129–159	Seagate-reserved	xxxxH

160–254	ATA-reserved	0000H

255	Integrity word	xxA5H

Note. Advanced Power Management (APM) and Automatic Acoustic Management (AAM) features are not supported

Note. See the bit descriptions below for words 63, 88, and 93 of the Identify Drive data:

Description (if bit is set to 1)

	Bit	Word 63

	0	Multiword DMA mode 0 is supported.

	1	Multiword DMA mode 1 is supported.

	2	Multiword DMA mode 2 is supported.

	8	Multiword DMA mode 0 is currently active.

	9	Multiword DMA mode 1 is currently active.

	10	Multiword DMA mode 2 is currently active.

	Bit	Word 88

	0	Ultra DMA mode 0 is supported.

	1	Ultra DMA mode 1 is supported.

	2	Ultra DMA mode 2 is supported.

	3	Ultra DMA mode 3 is supported.

	4	Ultra DMA mode 4 is supported.

	8	Ultra DMA mode 0 is currently active.

	9	Ultra DMA mode 1 is currently active.

	10	Ultra DMA mode 2 is currently active.

	11	Ultra DMA mode 3 is currently active.

	12	Ultra DMA mode 4 is currently active.

	13	Ultra DMA mode 5 is currently active.

	Bit	Word 93

	13	1 = 80-conductor cable detected, CBLID above VIH
		0 = 40-conductor cable detected, CBLID below VIL

26	DB35 Series Product Manual, Rev. B

Image 36

Contents DB35 Series Page DB35 Series Page Revision status summary sheet DB35 Series Product Manual, Rev. B Contents DB35 Series Product Manual, Rev. B List of Figures Viii DB35 Series Product Manual, Rev. B Introduction DB35 SeriesDB35 Series Product Manual, Rev. B Drive specifications Specification summary tableDrive specifications Altitude, nonoperating To 12,192 m Below mean sea level, max LBA mode Formatted capacityRecording and interface technology Physical characteristics Seek timeStart/stop times Typical seek timesPower specifications Typical current profile Conducted noiseVoltage tolerance Environmental specifications Temperature gradient Wet bulb temperatureHumidity Relative humidity AltitudeAcoustics Electromagnetic immunityNonoperating vibration Operating acousticsSafety certification ReliabilityAgency certification Electromagnetic compatibilityEnvironmental protection Australian C-Tick N176FCC verification European Union Restriction of Hazardous Substances RoHSDB35 Series Product Manual, Rev. B Configuring and mounting the drive Handling and static discharge precautionsBreather filter hole precautions Breather filter hole locationJumper settings Master/slave configurationDrive as master with a non-ATA-compatible slave Cable-select optionDrive mounting Ultra ATA/100 cableMounting dimensions-top, side and end view DB35 Series Product Manual, Rev. B ATA interface signals and connector pins ATA interfaceSupported ATA commands Command name Command code in hexF6H Identify Device command Word Description ValueXxxxH Description if bit is set to Bit Word Set Features command 4 S.M.A.R.T. commandsCode in features Register A.R.T. command Seagate Technology support services Internet MySeagate Reseller.seagate.comPresales Support Technical SupportWarranty Service Authorized Service CentersCall Center Toll-free Direct dial Americas +1-405-324-47301 +1-405-324-4704Americas SEAGATE2 +1-405-324-47002 +1-405-324-3339 Call Center Toll-free Direct dial FAX / E-mailFAX Services-All Europe toll call Call Center Presales and Technical Support Warranty ServiceToll-Free Support Numbers Asia/Pacific Support Services DB35 Series Product Manual, Rev. B Index NumericsPage Page DB35 Series Product Manual, Rev. B Page Seagate Technology LLC