9.5.2.1.2Receive eye mask
Figure 14 describes the receive eye mask. This eye mask applies to jitter after the application of a single pole high-pass frequency-weighting function that progressively attenuates jitter at 20 dB/decade below a frequency of ((bit rate) / 1.667).
Figure 14. Receive eye mask
Verifying compliance with the limits represented by the receive eye mask should be done with reverse channel traffic present in order that the effects of crosstalk are taken into account.
9.5.2.1.3Jitter tolerance masks
Figure 15 describes the receive tolerance eye masks and is constructed using the X2 and Z2 values given in table 27. X1OP is half the value for total jitter intable 27 and X1TOL is half the value for total jitter in table 28, for jitter frequencies above ((bit rate) / 1.667).
Figure 15. Receive tolerance eye mask
54 | Cheetah NS 10K.2 SAS Product Manual, Rev. C |