Seagate ST3450802SS Standards, compliance and reference documents, Electromagnetic compatibility

Page 6

2.0Standards, compliance and reference documents

The drive has been developed as a system peripheral to the highest standards of design and construction. The drive depends on its host equipment to provide adequate power and environment for optimum performance and compliance with applicable industry and governmental regulations. Special attention must be given in the areas of safety, power distribution, shielding, audible noise control, and temperature regulation. In particular, the drive must be securely mounted to guarantee the specified performance characteristics. Mounting by bot- tom holes must meet the requirements of Section 8.3.

2.1Standards

The Cheetah NS SAS family complies with Seagate standards as noted in the appropriate sections of this manual and the Seagate SAS Interface Manual, part number 100293071.

The Cheetah disk drive is a UL recognized component per UL 60950-1, CSA certified to CSA 60950-1, and VDE or TUV certified to EN 60950-1.

2.1.1Electromagnetic compatibility

The drive, as delivered, is designed for system integration and installation into a suitable enclosure prior to use. The drive is supplied as a subassembly and is not subject to Subpart B of Part 15 of the FCC Rules and Regulations nor the Radio Interference Regulations of the Canadian Department of Communications.

The design characteristics of the drive serve to minimize radiation when installed in an enclosure that provides reasonable shielding. The drive is capable of meeting the Class B limits of the FCC Rules and Regulations of the Canadian Department of Communications when properly packaged; however, it is the user’s responsibility to assure that the drive meets the appropriate EMI requirements in their system. Shielded I/O cables may be required if the enclosure does not provide adequate shielding. If the I/O cables are external to the enclosure, shielded cables should be used, with the shields grounded to the enclosure and to the host controller.

2.1.1.1Electromagnetic susceptibility

As a component assembly, the drive is not required to meet any susceptibility performance requirements. It is the responsibility of those integrating the drive within their systems to perform those tests required and design their system to ensure that equipment operating in the same system as the drive or external to the system does not adversely affect the performance of the drive. See Table 12 for DC power requirements.

2

Cheetah NS 10K.2 SAS Product Manual, Rev. C

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Cheetah NS 10K.2 SAS ST3600002SS ST3450802SSPage Contents Seagate Technology support services Defect and error managementInstallation Interface requirementsScope Electromagnetic compatibility Standards, compliance and reference documentsStandards Electromagnetic susceptibilityCompliance Reference documents General description Performance Standard featuresMedia description ReliabilityFactory-installed options Formatted capacitiesProgrammable drive capacity Access time Performance characteristicsInternal drive characteristics Seek performanceFormat command execution time minutes General performance characteristicsStart/stop time Prefetch/multi-segmented cache control Cache operationCaching write data Prefetch operation Recoverable Errors Reliability specificationsError rates Unrecoverable ErrorsPreventive maintenance Reliability and serviceInterface errors Hot plugging the drivePerformance impact 4 S.M.A.R.TControlling S.M.A.R.T Reporting controlThermal monitor Temperature Log Page 0Dh Parameter Code DescriptionPredictive failures Drive Self Test DSTDST failure definition ImplementationProduct warranty Short test Function Code 001bExtended test Function Code 010b Shipping DC power requirements Physical/electrical specificationsAC power requirements ST3600002SS DC power requirementsST3450802SS DC power requirements General DC power requirement notesPower sequencing Conducted noise immunityCurrent profiles Typical ST3600002SS drive +5V and +12V current profiles Power dissipation ST3600002SSST3450802SS Temperature a. Operating Environmental limitsShock and vibration Relative humidityEffective altitude sea level a. Operating ShockPackage size Packaged/product weight Drop height Recommended mountingAcoustics Air cleanlinessVibration a. Operating-normal Corrosive environmentChina Restriction of Hazardous Substances RoHS Directive Mechanical specifications Physical dimensionsDefect and error management Drive internal defects/errorsDrive error recovery procedures 77.81 Media Pre-Scan SAS system errorsBackground Media Scan Deferred Auto-ReallocationIdle Read After Write Installation Drive orientationCooling Air flowDrive mounting GroundingSAS features Interface requirementsDual port support Scsi commands supported Commands supported by Cheetah NS 10K.2 SAS family drivesCommands supported by Cheetah NS 10K.2 SAS family drives Commands supported by Cheetah NS 10K.2 SAS family drives Commands supported by Cheetah NS 10K.2 SAS family drives Inquiry data 2Mode Sense dataBytes Data hex Page 2.1 ST3600002SS Mode Sense data Mode Pages2.2 ST3450802SS Mode Sense data Supported Feature or condition Miscellaneous operating features and conditionsMiscellaneous features Miscellaneous statusSAS physical interface Datum B Physical characteristics Connector requirementsPin descriptions Pin Signal name Signal typeElectrical description SAS pin descriptionsSAS transmitters and receivers Signal characteristicsPower Ready LED OutGeneral interface characteristics LED drive signalDifferential signals Eye masks Eye masks overviewReceive eye mask X2OP 0, 5xadditional sinusoidal jitter X1OP Transmitter signal characteristics Signal characteristica Units 5Gb/s 0Gb/sMaximum allowable jitter Receiver signal characteristicsSignal characteristic Units 5Gb/s 0Gb/s 5Gb/s m, n 0Gb/s m, n Deterministic jitterq5Gb/sa 0Gb/sa Sinusoidal Deterministic Total Receiver jitter toleranceImpedance requirements Sheet 1 JitterhImpedance requirements Sheet 2 Electrical TxRx connections= -5, 437dB Shows the zero-length test load SAS-2 Specification compliance Receiver characteristicsAdditional information Seagate Technology support services Presales SupportTechnical Support Warranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index Page SAS See also cooling Page Seagate Technology LLC
Related manuals
Manual 74 pages 59.57 Kb
Top Page Image Contents