Seagate ST3600002SS, ST3450802SS manual Compliance

Page 7

2.2Compliance

2.2.1Electromagnetic compliance

Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking and C-Tick Marking. The drive was tested in a representative system for typical applications. The selected sys- tem represents the most popular characteristics for test platforms. The system configurations include:

•Typical current use microprocessor

•3.5-inch floppy disk drive

•Keyboard

•Monitor/display

•Printer

•External modem

•Mouse

Although the test system with this Seagate model complies with the directives/standards, we cannot guarantee that all systems will comply. The computer manufacturer or system integrator shall confirm EMC compliance and provide the appropriate marking for their product.

Electromagnetic compliance for the European Union

If this model has the CE Marking it complies with the European Union requirements of the Electromagnetic Compatibility Directive 89/336/EEC of 03 May 1989 as amended by Directive 92/31/EEC of 28 April 1992 and Directive 93/68/EEC of 22 July 1993.

Australian C-Tick

If this model has the C-Tick Marking it complies with the Australia/New Zealand Standard AS/NZS3548 1995 and meets the Electromagnetic Compatibility (EMC) Framework requirements of Australia’s Spectrum Man- agement Agency (SMA).

Korean MIC

If this model has the Korean Ministry of Information and Communication (MIC) logo, it complies with paragraph 1 of Article 11 of the Electromagnetic Compatibility (EMC) Control Regulation and meets the Electromagnetic Compatibility Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea.

Taiwanese BSMI

If this model has two Chinese words meaning “EMC certification” followed by an eight digit identification num- ber, as a Marking, it complies with Chinese National Standard (CNS) 13438 and meets the Electromagnetic Compatibility (EMC) Framework requirements of the Taiwanese Bureau of Standards, Metrology, and Inspec- tion (BSMI).

Cheetah NS 10K.2 SAS Product Manual, Rev. C

3

Image 7

Contents ST3600002SS ST3450802SS Cheetah NS 10K.2 SASPage Contents Interface requirements Defect and error management Installation Seagate Technology support servicesScope Electromagnetic susceptibility Standards, compliance and reference documentsStandards Electromagnetic compatibilityCompliance Reference documents General description Reliability Standard featuresMedia description PerformanceFormatted capacities Factory-installed optionsProgrammable drive capacity Seek performance Performance characteristicsInternal drive characteristics Access timeGeneral performance characteristics Format command execution time minutesStart/stop time Cache operation Prefetch/multi-segmented cache controlCaching write data Prefetch operation Unrecoverable Errors Reliability specificationsError rates Recoverable ErrorsHot plugging the drive Reliability and serviceInterface errors Preventive maintenanceReporting control 4 S.M.A.R.TControlling S.M.A.R.T Performance impactDrive Self Test DST Temperature Log Page 0Dh Parameter Code DescriptionPredictive failures Thermal monitorImplementation DST failure definitionShort test Function Code 001b Product warrantyExtended test Function Code 010b Shipping ST3600002SS DC power requirements Physical/electrical specificationsAC power requirements DC power requirementsGeneral DC power requirement notes ST3450802SS DC power requirementsConducted noise immunity Power sequencingCurrent profiles Typical ST3600002SS drive +5V and +12V current profiles ST3600002SS Power dissipationST3450802SS Environmental limits Temperature a. OperatingShock Relative humidityEffective altitude sea level a. Operating Shock and vibrationRecommended mounting Package size Packaged/product weight Drop heightCorrosive environment Air cleanlinessVibration a. Operating-normal AcousticsChina Restriction of Hazardous Substances RoHS Directive Physical dimensions Mechanical specificationsDrive internal defects/errors Defect and error managementDrive error recovery procedures 77.81 Deferred Auto-Reallocation SAS system errorsBackground Media Scan Media Pre-ScanIdle Read After Write Drive orientation InstallationAir flow CoolingGrounding Drive mountingInterface requirements SAS featuresDual port support Commands supported by Cheetah NS 10K.2 SAS family drives Scsi commands supportedCommands supported by Cheetah NS 10K.2 SAS family drives Commands supported by Cheetah NS 10K.2 SAS family drives Commands supported by Cheetah NS 10K.2 SAS family drives 2Mode Sense data Inquiry dataBytes Data hex Page Mode Pages 2.1 ST3600002SS Mode Sense data2.2 ST3450802SS Mode Sense data Miscellaneous status Miscellaneous operating features and conditionsMiscellaneous features Supported Feature or conditionSAS physical interface Datum B Connector requirements Physical characteristicsSAS pin descriptions Pin Signal name Signal typeElectrical description Pin descriptionsReady LED Out Signal characteristicsPower SAS transmitters and receiversEye masks Eye masks overview LED drive signalDifferential signals General interface characteristicsReceive eye mask X2OP 0, 5xadditional sinusoidal jitter X1OP Signal characteristica Units 5Gb/s 0Gb/s Transmitter signal characteristics5Gb/s m, n 0Gb/s m, n Deterministic jitterq Receiver signal characteristicsSignal characteristic Units 5Gb/s 0Gb/s Maximum allowable jitterJitterh Receiver jitter toleranceImpedance requirements Sheet 1 5Gb/sa 0Gb/sa Sinusoidal Deterministic TotalElectrical TxRx connections Impedance requirements Sheet 2= -5, 437dB Shows the zero-length test load Receiver characteristics SAS-2 Specification complianceAdditional information Presales Support Seagate Technology support servicesTechnical Support Data Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index Page SAS See also cooling Page Seagate Technology LLC

Related manuals

Manual 74 pages 59.57 Kb