Western Telematic IPS-800-D20, IPS-800E-D20, IPS-1600-D20, IPS-1600E-D20 Plug Parameters Menus

Page 29

Conﬁ guration

Figure 5.7: Plug Parameters Menu - Web Browser Interface

PLUG #1 PARAMETERS:

1.Plug Name:

2.Password:(undeﬁned)

3.Boot/Seq. Delay: 0.5 Secs

4.Power Up Default: On(undeﬁned)

Enter Selection,

Press <ESC> to Exit ...

Figure 5.8: Plug Parameters Menu - Text Interface (Plug 1 Shown)

5.3.3.Plug Parameters Menus

The Plug Parameters Menus are used to deﬁne Plug Names, Plug Passwords, boot/sequence delay times and Power Up Default values for each of the IPS’s Switched AC Outlets.

•Web Browser Interface: Click the "Setup" button to access the conﬁguration menus, then click the "Plug Parameters" button. The Plug Parameters Menu will be displayed as shown in Figure 5.7.

•Text Interface: Type /P n and then press [Enter] (Where n is the number or name of the plug you wish to conﬁgure.) The Plug Parameters Menu will be displayed as shown in Figure 5.8.

Note that in this case, the major difference between the Web Browser Interface and Text Interface is that the Web Browser Interface allows you to select parameters for all plugs from a single menu, whereas the Text Interface includes a separate menu for each plug.

5-11

Image 29

Contents Models User’s GuidePage Installation Instructions FCC Part 15 Regulation Table of Contents List of Figures Introduction Typographic Conventions IPS-800-D20, IPS-800E-D20, IPS-1600-D20 IPS-1600E-D20 UnitsIPS-800-D20 Back Panel 120 VAC Model Shown Unit DescriptionIPS-800/1600-D20 Series User’s Guide Quick Start Hardware InstallationApply Power to the IPS Connect your PC to the IPS Communicating with the IPSText Interface Text Interface Type /X and press Enter Installing the Cable Keepers InstallationPower Supply Connection IPS-800 Series Cable Keeper Installation Connection to Switched OutletsConnecting a Local PC Connecting the Network CableConnecting an External Modem Serial COM / RS232 Port ConnectionIPS-800/1600-D20 Series User’s Guide System Mode and User Mode ConfigurationPlug Status Screen Web Browser Interface IPS-800-D20 Shown Accessing the Web Browser InterfaceAccessing the Text Interface $ telnet 192.168.168.168 Enter Configuration Menus General Parameters Menu Web Browser Interface General Parameters MenusGeneral Parameters Menu Text Interface IPS-800/1600-D20 Series User’s Guide Serial Parameters Serial Parameters MenuIPS-800/1600-D20 Series User’s Guide Plug #1 Parameters Plug Parameters MenusPlug Passwords and Co-Location Features Reboot Cycles Network Parameters Menu Web Browser Interface Network Parameters Menus IP Security Feature Conﬁ guration 12 Telnet Parameters Menu Web Browser Interface Telnet Parameters Menus14 Web Server Parameters Menu Web Browser Interface Web Server Parameters MenusSave Configuration Parameters Plug Status Screen Web Browser Interface OperationOperation via the Web Browser Interface Plug Status Menu Web Browser Interface IPS-800-D20 Shown Plug Status Screen Text Interface Operation via the Text InterfaceIPS Help Screen Text Interface Switching and Reboot Commands Text InterfaceBoot 1 or /BO Atmswtch Applying Commands to Several Plugs Text Interface Logging Out of Command ModeAutomated Mode Manual Operation Sending Parameters to a File Saving and Restoring Configuration ParametersRestoring Saved Parameters Upgrading the IPS Firmware IPS-800/1600-D20 Series User’s Guide Apx-1 Interface DescriptionSerial COM / RS232 Port Interface Apx-2 SpecificationsApx-3 Customer ServiceApx-4 Trademark and Copyright InformationIndex-1 IndexIndex-2 Page Sterling Irvine California 949 586-9950 Toll Free