Western Telematic IPS-800-D20, IPS-800E-D20, IPS-1600-D20, IPS-1600E-D20 Specifications, Apx-2

Page 52

IPS-800/1600-D20 Series - User’s Guide

B. Specifications

Power Input / Output:

Models IPS-800-D20 & IPS-1600-D20 (120 VAC)

AC Input: Two Separate Circuits; 20 Amps Max. per Circuit

Voltage: 100 - 120 VAC 50/60 Hz

Connectors: Two (2) IEC320-C20 Inlets

AC Outputs:

Connectors: NEMA 5-15R Outlets. (IPS-800-D20 has Eight Outlets, IPS-1600-D20 has 16 Outlets.)

Load: 15 Amps per Outlet. 20 Amps per Circuit; providing a Total of 40 Amps for both circuits.

Models IPS-800E-D20 & IPS-1600E-D20 (230 VAC)

AC Input: Two Separate Circuits; 20 Amps Max. per Circuit

Voltage: 100 - 240 VAC 50/60 Hz

Connectors: Two (2) IEC320-C20 Inlets

AC Outputs:

Connectors: IEC320-C13 Outlets. (IPS-800E-D20 has Eight Outlets, IPS-1600E-D20 has 16 Outlets.)

Load: 15 Amps per Outlet. 20 Amps per Circuit; providing a Total of 40 Amps for both circuits.

Control Ports:

Ethernet Port: 10Base-T

COM Port: DB9M, RS232C, DTE

RS232 Coding: Serial ASCII, 7/8 Bits

Physical / Environmental:

Size: Models IPS-800-D20 & IPS-800E-D20

Width: 17.5” (44.5 cm) Standard Rack

Depth: 7.0” (17.8 cm)

Height: 1.75” (4.5 cm) 1 Rack U

Size: Models IPS-1600-D20 & IPS-1600E-D20

Width: 17.5” (44.5 cm) Standard Rack

Depth: 7.0” (17.8 cm)

Height: 3.5” (8.9 cm) 2 Rack U

Shipping Weight:

Models IPS-800-D20 & IPS-800E-D20: 10 lbs (4.5 Kg)

Models IPS-1600-D20 & IPS-1600E-D20: 12 lbs (5.5 Kg)

Operating Temperature: 32°F to 122°F (0°C to 50°C)

Humidity: 10 - 90% RH

Apx-2

Image 52
Contents User’s Guide ModelsPage Installation Instructions FCC Part 15 Regulation Table of Contents List of Figures Introduction IPS-800-D20, IPS-800E-D20, IPS-1600-D20 IPS-1600E-D20 Units Typographic ConventionsUnit Description IPS-800-D20 Back Panel 120 VAC Model ShownIPS-800/1600-D20 Series User’s Guide Apply Power to the IPS Hardware InstallationQuick Start Communicating with the IPS Connect your PC to the IPSText Interface Text Interface Type /X and press Enter Power Supply Connection InstallationInstalling the Cable Keepers Connection to Switched Outlets IPS-800 Series Cable Keeper InstallationConnecting the Network Cable Connecting a Local PCConnecting an External Modem Serial COM / RS232 Port ConnectionIPS-800/1600-D20 Series User’s Guide Configuration System Mode and User ModeAccessing the Web Browser Interface Plug Status Screen Web Browser Interface IPS-800-D20 ShownAccessing the Text Interface $ telnet 192.168.168.168 Enter Configuration Menus General Parameters Menus General Parameters Menu Web Browser InterfaceGeneral Parameters Menu Text Interface IPS-800/1600-D20 Series User’s Guide Serial Parameters Menu Serial ParametersIPS-800/1600-D20 Series User’s Guide Plug Parameters Menus Plug #1 ParametersPlug Passwords and Co-Location Features Reboot Cycles Network Parameters Menu Web Browser Interface Network Parameters Menus IP Security Feature Confi guration Telnet Parameters Menus 12 Telnet Parameters Menu Web Browser InterfaceWeb Server Parameters Menus 14 Web Server Parameters Menu Web Browser InterfaceSave Configuration Parameters Operation via the Web Browser Interface OperationPlug Status Screen Web Browser Interface Plug Status Menu Web Browser Interface IPS-800-D20 Shown Operation via the Text Interface Plug Status Screen Text InterfaceSwitching and Reboot Commands Text Interface IPS Help Screen Text InterfaceBoot 1 or /BO Atmswtch Logging Out of Command Mode Applying Commands to Several Plugs Text InterfaceAutomated Mode Manual Operation Saving and Restoring Configuration Parameters Sending Parameters to a FileRestoring Saved Parameters Upgrading the IPS Firmware IPS-800/1600-D20 Series User’s Guide Serial COM / RS232 Port Interface Interface DescriptionApx-1 Specifications Apx-2Customer Service Apx-3Trademark and Copyright Information Apx-4Index Index-1Index-2 Page Sterling Irvine California 949 586-9950 Toll Free