Tyan Computer TYAN S1572 ATX Power Management Setup, WPower Management, WPM Control by APM

4.7.1 Power Management Setup

ROM ISA BIOS

POWER MANAGEMENT SETUP

AWARD SOFTWARE, INC

Power Management	:Disabled	Reload Global Timer Events
PM Control By APM	:No	IRQ (3-7, 9-15), NMI	Disable
Video Off Method	:Blank Screen	Primary IDE 0	Disable
Video Off After	:N/A	Primary IDE 1	Disable
Doze Mode	:Disabled	Secondary IDE 0	Disable
Standby Mode	:Disabled	Secondary IDE 1	Disable
Suspend Mode	:Disabled	Floppy Disk	Disable
HDD Power Down	:Disabled	Serial Port	Disable
Throttle Duty Cycle	:62.5%	Parallel Port	Disable
ZZ Active Monitor	:Disable
IRQ8 Clock Event	:Disable

wPower Management

Options are disabled, user defined, Min saving, and Max saving.

wPM Control by APM

Options are "Yes" and "No". When set for "No", system BIOS will ignore APM when power managing the system. If set on "Yes" the system BIOS will wait for APM's prompt before it enters any PM mode, e.g. Doze, Standby or Suspend.

wVideo Off Method

The "Blank Screen" option will let the system BIOS blanks the screen when disabling video. V/H SYNC+Blank will let the BIOS turn off the V-SYNC and H-SYNC signals from the VGA card to the monitor.

S1572-001-01 http://www.tyan.com 29