Tyan Computer TYAN S1572 ATX Getting Help Main Menu, Setup Page menu/Option Page Setup Menu

Page 20

4.3. Getting Help

4.3.1. Main Menu

The on-line description of the highlighted setup function is displayed at the bottom of the screen.

4.3.2. Setup Page menu/Option Page Setup Menu

Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted items. To exit the Help Window, press <Esc>.

4.4. The Main Menu

Once you enter the Award BIOS CMOS Setup Utility, the Main Menu (Figure 4.1) will appear on the screen. The Main Menu allows you to select from the eight setup functions and 2 exit choices. Use the arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.

Figure 4.1: Main Menu

ROM ISA BIOS (2A59CT51)

CMOS SETUP UTILITY

AWARD SOFTWARE, INC.

STANDARD CMOS SETUP

INTEGRATED PERIPHERALS

BIOS FEATURES SETUP

SUPERVISOR PASSWORD

CHIPSET FEATURES SETUP

USER PASSWORD

POWER MANAGEMENT

IDE HDD AUTO DETECT

PNP/PCI CONFIGURATION

SAVE AND EXIT

LOAD BIOS DEFAULTS

EXIT WITHOUT SAVING

ESC : Save & Exit Setup

 

:Select Item

F10 : Quit

(Shift)F2

:Change Color

Time, Date, Hard Disk Type,.....

S1572-001-01 http://www.tyan.com

20

 

 

 

 

 

 

 

 

 

Image 20
Contents Tyan S1572 ATX Page Table Of Contents Introduction Hardware Specifications/Features Software Specifications EnvironmentBoard Installation On Board Resource Setting .1 S1572 ATX Board Layout CPUCPU Speed Settings for Cyrix/SGS/IBM 6x86/M1/AMD Dimm Memory Voltage Select 3V is DefaultHeatsink Fan Power J18 JP23 CPU SpeedBios Voltage Select JP2 Default is CPU Select Default P54C, P55CMMX, & CyrixCmos Reset JP1Default Battery On J8 Jumper Block DescFlash Eprom JP2 Reset Connector J8 pinKeylock Connector J25 Port Setting J15 and J16 Speaker Connector J8 pinsHDD LED J8 pins 13-14 and pins Infra Red Interface J8 pins 8-11 and J2Speaker Connector Installation Hardware Reset Switch Connector InstallationHardware Cmos & Password Reset Refer to for Flash Eprom upgrade proceduresDram Installation CPU Installation Peripheral Device Installation Upgrading Cache MemoryPress F1 to CONTINUE, CTRL-ALT-ESC or DEL to Enter Setup Entering SetupTo Enter Setup Before Boot Press CTRL-ALT- ESC or DEL KEY Control Keys Setup Page menu/Option Page Setup Menu Getting Help Main MenuWStandard Cmos setup WBIOS features setupWChipset features setup WPower Management setupTime Standard Cmos Setup MenuDate Primary/Secondary Drive Type Drive a type/Drive B typeVideo EGA/VGAHalt On MemoryExpanded Memory Other MemoryAttempting to write to boot sector, continue? Y/N Boot SequenceSwap Floppy Drive Default value is Disabled Virus warningGate A20 Option Boot Up Floppy SeekBoot Up NumLock Status Default value is On Chipset Features Setup Video Bios ShadowChipset Features Screen Security OptionPower Management Setup WPower ManagementWPM Control by APM WVideo Off MethodWReload Global Timer Events WDoze ModeWStandby Mode PCI Slot Configuration ROM ISA Bios PCI Slot Configuration Award SOFTWARE, INCWResources Controlled By WIRQ n assigned toLegacy ISA PCI/ISA PnPIntegrated Peripherals Load Setup defaults Enter PasswordROM ISA Bios Cmos Setup Utility Award SOFTWARE, INC Password DisabledIDE HDD Auto Detection Flash Writer Utility Page Flash Memory Writer Utility Screen Award Flash Memory WriterTimer MAP System ResourceDMA Channels NMI