wSecurity Option
This category allows you to limit access to the system setup, or just setup. Default value is Setup
System | The system will not boot and access to Setup will be denied if the correct |
| password is not entered at the prompt |
|
|
Setup | The system will boot, but access to setup will be denied if the password is |
| not entered at the prompt |
|
|
wVideo BIOS Shadow
It determines whether Video BIOS will be copied to RAM, however, it is an optional chipset design. Default is Enabled.
4.7 Chipset Features Setup
This screen controls the settings for the board's chip set. The controls for this screen are the same as the previous screen.
The Chipset Features Screen
ROM ISA BIOS
CHIPSET SETUP UTILITY
AWARD SOFTWARE, INC.
Auto Configuration | :Enabled |
DRAM Timing | :70ns |
DRAM Leadoff Timing | :10/6/3 |
DRAM Readburst (EDO/FP) | :x222/x333 |
DRAM Write Burst Timing | :x333 |
Fast EDO Path Select | :Disabled |
Refresh RAS# Assertion | :5/Clks |
Fast RAS to CAS delay | :2 |
DRAM Page Idle Timer | :8Clks |
DRAM Enhanced Paging | :Enabled |
Fast MA to RAS# delay | :1 Clks |
SDRAM(cas lat/ras to cas) | :2/2 |
SDRAM Speculative Read | :Disabled |
System BIOS Cacheable | :Enabled |
Video BIOS Cacheable | :Enabled |
8 bit I/O Recovery Time | :1 |
16 bit I/O Recover Time | :1 |
Memory Hole at 15M/16M | :Disabled |
PCI Passive Release | :Enabled |
PCI Delayed Transaction | :Enabled |
Pipline Cache Timing | :Faster |
Mem Drive Strength(ma/ras) | :2/2 |
DRAM Refresh | :15.6us |
More Information on these settings can be found at Tyan's web site. http://www.tyan.com
ESC :Quit | :Select Item | |
F1 | :Help | |
F5 | :Old Values | (Shift)F2 :Color |
F6 | :Load BIOS Defaults | |
F7 | :Load Setup Defaults |
28 | ||
|
|
|
|
|
|
|
|
|