USRobotics R24.0616.00 Am unable to add my printer in Add Printer Wizard, Solution, Ports tab

English

1.Unplug the power adapter from the print server.

2.Press and hold the RESET button.

3.Plug the power adapter back in to the print server.

4.Release the RESET button.

I am unable to add my printer in Add Printer Wizard.

S o l u t i o n :

Your printer may not be compatible with the Wireless USB Print Server. Close all the print server setup screens and disconnect the printer from the print server.

1.Install the printer on your computer according to the printer manufacturer’s instructions.

2.When finished, reconnect the printer to the print server.

3.Click Windows Start > Programs > U.S. Robotics Print Server > Print Driver Setup.

4.Follow the on-screen instructions to complete the installation.

I am unable to print a test page.

S o l u t i o n :

1. Windows XP, 2000, and NT Users:

oClick Windows Start > Printers and Faxes. Windows Me, 98, and 95 Users:

1) Click Windows Start > Settings > Control Panel.

2) Within Control Panel, click Printers and Faxes.

2.Right-click the printer you just installed, select Properties, and then click the

Ports tab.

3.Make sure the print server port is selected. If it is not, select it, click Apply, and then click OK. You should now be able to print a test page.

I am unable to print via a wireless connection or the Wireless USB Print Server is not connecting to my wireless network.

Solution 1:

Make sure you have the SSID and security information that match the settings of the wireless router in your network. If any of this information doesn’t match, you will not be able to connect to the wireless network. You will need to reconnect the print server to your router using an Ethernet cable in order to make any con- figuration changes.

Solution 2:

Make sure your router or access point is using only WEP or WPA-PSK with TKIP for security. These are the only two types of security that the Wireless USB Print Server supports.

6