English
I created a new wireless network and my Wireless USB Print Server cannot connect.
S o l u t i o n :
1.Insert the U.S. Robotics Installation
2.Click Setup Wizard and follow the
3.When you get to the areas concerning wireless settings, enter the appropriate information for the new wireless network.
I have installed my
S o l u t i o n :
If you have a
I tried to install the software for
S o l u t i o n :
If you have previously installed the Wireless USB Print Server software, you will need to uninstall it before you can install the
1.Click Windows Start > Programs > Print Server.
2.Select Uninstall and follow the
3.When the uninstallation is complete, you will need to reboot your computer. You will then be able to install the
Additional Information
For Regulatory and Warranty information, see the User Guide on the USRobotics Installation
For operation and configuration information, see the User Guide on the USRobotics Installation
For troubleshooting and technical support:
1.See the User Guide on the USRobotics Installation
2.Go to the Support section of the USRobotics Web site at www.usr.com/support/.
Many of the most common difficulties that users experience have been addressed in the FAQ and Troubleshooting Web pages for your print server. The Support pages also contain information on the latest firmware and may contain documentation updates.
7