Omega C4EIT/-EIT manual Date and Time

Page 29

4.5.4.1 Date and Time

Current Date – This field indicates the iServer’s real time clock date. The format is yyyy/mm/dd. When there is no date defined, the iServer will be defaulted to 2099/01/01 and be shown in red to alert you that it has not yet been set.

Current Time – This field indicates the iServer’s real time clock time. The format is military time (24-hour) and it is entered as hh:mm:ss.

Change Date and Time – By clicking on this option the real data and time can be entered.

Once the iServer is rebooted from any web page, the iServer will lose its date and time settings.

If the iServer is setup to get it’s time from a Network Time Server, then the time will be re-assigned after the reboot.

Network Time Server – If there is a time server on the network or the Internet, the iServer will get the real date and time once the Network Time Server’s IP address is provided. Default is unchecked.

NTS Address – The field to enter the Network Time Server’s IP address.

The U.S. National Institute of Standards and Technology (NIST) publishes a list of time servers on the Internet used by the NIST Internet Time Service (ITS). The list includes each server’s name, IP address, and location in the United States. As of the publication date of this manual, links to the list can be found at http://tf.nist.gov.

Time Zone – If Network Time Server option is checked, the correct time zone must be selected for the correct time display.

23

Image 29

Contents User’s Guide Page Dhcp DNS Table of ContentsList of Figures Assigning an IP Address using iConnect IServer DiagnosticsAccessing the iServer’s Home ARP Commands and ResponsesILog Error Messages Data Transmission Characteristics RS485List of Tables Table K-1Before You Begin TIPEMC Considerations Part IntroductionDescription Accessing Devices Over the EthernetPart Hardware Physical Characteristics and MountingSerial Communication Interfaces For Models with -C4EIT Network Communication Interface SectionHalf Duplex Hookup Pin# ISeries Wiring Master/Slave Units via RS485 InterfaceNetwork Communication Interfaces 1 10BASE-T RJ-45 Pinout RJ-45 Pinout Connecting iServer to PC/Hub/Switch/RouterEthernet MAC Address Part Network ConfigurationNetwork Protocols IP Address DhcpDNS Example C\Telnet 192.168.1.200 Part Operations Serial Interface Configuration Communication ProtocolCommand Prefix Letters LSB MSB Pinging the iServer from a DOS Prompt Default IP AddressIServer Login Access and Configuration Using a Web Browser4a iServer -C4EIT Overview OverviewIServer Network Network IServer Serial Page RS485 Serial Port IServer Serial Page Network to Serial IServer Serial Page Packing Techniques IServer Serial Page Multi-Host Connection 10 iServer Configuration Page Ethernet Configuration Date and Time 11 iServer Management Page Email, Snmp Management Email Snmp 12 iServer Management Page Alarm AT&T 13 iServer Security 14 iServer Device Query 15 iServer Device Setup Page RS485 -C4EIT Device Setup -C4EIT16 iServer Device Parameters Page -C4EIT 17 iServer Device Setup Page -EIT 18 iServer Device Parameters Page -EIT Device Parameters -EITReadings Device Setpoints Readings21 iServer Terminal Terminal22 iServer System System23 iServer Diagnostics Page 4.5.12.1 Diagnostics Serial Port DiagnosticsDiagnostics Ping Diagnostics Ethernet PortSerial Interface -C4EIT Part SpecificationsTime-Lag, IEC 127-3 recognized Serial Interface Network InterfacePart Electrical Safety EN61010-12001Measurement Category Transients Overvoltage Surge 1.2 / 50uS pulseAppendix Aglossary Appendix B IP Address Mask Dotted Notation Mask Binary Mask Bits Class a Appendix C IP NetmaskClass B Class CDec Hex Binary Char No Parity No parity Appendix D Ascii ChartDec Hex Binary Ascii Control Codes Appendix D Ascii Chart ContinuationDec Hex Ctrl Key Definition Dec Hex Ctrl Key Definition Char EquivAppendix E IConnect Software Figure E-1 Assigning an IP Address using iConnectFigure E-2 Accessing the iServer’s Home Communication interface skip for embedded ethernet -EIT Appendix F HTTPget Program\iServerhttpget -r -S *02X01\r 192.168.1.2002000 \iServerhttpget -r -S *02X01\r Network read timeoutAppendix G ARP Program Arp -g ﬁ Same as arp -a192.168.1.96 Appendix H Telnet Setup Admin PortISeries? Figure H-3 Telnet Setup iServer Help Figure I-1b Serial Tunneling iSeries -EIT Figure I-1a Serial Tunneling iSeries -C4EITRemote iSeries -EIT/-C4EIT Figure I-2 Device-to-Device CommunicationLocal iSeries -EIT/-C4EIT Figure I-3 Serial Multi-Host Connection -C4EIT Tunneling Troubleshooting Appendix J IPORT IPORT, COM Port RedirectorIPORT Overview Figure J-2a Redirect Serial Connection Figure J-3 iPORT Main Window IPORT Configurations Appendix K ILog Software Figure K-1 iLog Software Logging Data for an iSeriesTable K-1 iLog Excel Applications Wireless DevicesNetworked Product ILOG File Alternate ISeriesTable K-2 iLog Error Messages Error # Description Page Page Page Page Page WARRANTY/DISCLAIMER Shop on line at omega.com