4.5.8.3 Device Parameters -EIT
After clicking on any of the numbers (1 through 8), you will be directed to the DEVICE PARAMETERS page.
Device name - This field allows you to enter the device name and can take up to eight alphanumeric characters. Default is blank.
Reading command - This field is where the actual command is typed.
The iServer will send this command to the serial device as soon as the READINGS page link is clicked. Default is blank.
Setpoint - This field is where the setpoint command is typed.
Response unit - This field is the response unit and can take up to eight alphanumeric characters. Default is blank.
Display format - How the value appears on the READINGS page; choice of raw which includes the command or decimal which just shows the value.
Figure 4.18 iServer DEVICE PARAMETERS Page (-EIT)
In the embedded
33