Omega C4EIT/-EIT manual Part Specifications, Serial Interface -C4EIT

Page 45

PART 5

SPECIFICATIONS

Serial Interface (-C4EIT)

Interface:

RS422 or RS485 (2-wire)

Connector:

Terminal Block Plugs

Serial Data Rates:

300 to 460,800 bps*

Characters:

*iSeries Controller max is 19,200 bps

5, 6, 7, or 8 data bits

Parity:

odd, even, or none

Stop Bits:

1 or 2

Flow Control:

Software (Xon/Xoff) and None

Network Interface

 

Interface:

Fixed 10BASE-T half duplex Ethernet

Connector:

RJ-45

Protocols:

TCP, UDP, SNMP, SMTP, TFTP, ICMP, Telnet, DHCP, DNS,

Compliant to Standard:

HTTP, ARP, and Modbus TCP/IP

IEEE 802.3

Indicators (LED’s):

10BASE-T (green) not active, On/Network (green),

 

Serial Transmit Tx (yellow), Serial Receive Rx (green);

Processor CPU:

Power (green)

ARM7, 72 MHz

Processor Memory:

512 Kbyte Flash, 32 Kbyte SRAM

Embedded Web Server:

Serves dynamic Web pages and Java applets

Management:

Device configuration and monitoring through Embedded Web

General

Server, Telnet login, Serial login, iConnect

 

Environmental

 

Operating Temperature:

0 to 50°C (-32 to 122°F), 90%RH non-condensing

Line Voltage/Power:

90 to 240 Vac +/-10%, 50 to 400 Hz*

 

110 to 375 Vdc, equivalent voltage

 

4 W, power for i8, i16, iDR Models + Ethernet

 

5 W, power for i8DV, i8DH, i16D Models + Ethernet

Low Voltage/

* No CE compliance above 60 Hz

 

Power Option:

20 to 36 Vdc, 4 W

 

External power source must meet Safety Agency Approvals.

 

*Units can be powered safely with 24 Vac power but,

 

no Certification for CE/UL are claimed.

39

Image 45
Contents User’s Guide Page Dhcp DNS Table of ContentsList of Figures Assigning an IP Address using iConnect IServer DiagnosticsAccessing the iServer’s Home ARP Commands and ResponsesILog Error Messages Data Transmission Characteristics RS485List of Tables Table K-1Before You Begin TIPEMC Considerations Part IntroductionDescription Accessing Devices Over the EthernetPart Hardware Physical Characteristics and MountingSerial Communication Interfaces For Models with -C4EIT Network Communication Interface SectionHalf Duplex Hookup Pin# ISeries Wiring Master/Slave Units via RS485 InterfaceNetwork Communication Interfaces 1 10BASE-T RJ-45 Pinout RJ-45 Pinout Connecting iServer to PC/Hub/Switch/RouterPart Network Configuration Network ProtocolsEthernet MAC Address Dhcp DNSIP Address Example C\Telnet 192.168.1.200 Serial Interface Configuration Communication Protocol Command Prefix LettersPart Operations LSB MSB Pinging the iServer from a DOS Prompt Default IP AddressIServer Login Access and Configuration Using a Web Browser4a iServer -C4EIT Overview OverviewIServer Network Network IServer Serial Page RS485 Serial Port IServer Serial Page Network to Serial IServer Serial Page Packing Techniques IServer Serial Page Multi-Host Connection 10 iServer Configuration Page Ethernet Configuration Date and Time 11 iServer Management Page Email, Snmp Management Email Snmp 12 iServer Management Page Alarm AT&T 13 iServer Security 14 iServer Device Query 15 iServer Device Setup Page RS485 -C4EIT Device Setup -C4EIT16 iServer Device Parameters Page -C4EIT 17 iServer Device Setup Page -EIT 18 iServer Device Parameters Page -EIT Device Parameters -EITReadings Device Setpoints Readings21 iServer Terminal Terminal22 iServer System System23 iServer Diagnostics Page 4.5.12.1 Diagnostics Serial Port DiagnosticsDiagnostics Ping Diagnostics Ethernet PortSerial Interface -C4EIT Part SpecificationsTime-Lag, IEC 127-3 recognized Serial Interface Network InterfacePart Electrical Safety EN61010-12001Measurement Category Transients Overvoltage Surge 1.2 / 50uS pulseAppendix Aglossary Appendix B IP Address Mask Dotted Notation Mask Binary Mask Bits Class a Appendix C IP NetmaskClass B Class CAppendix D Ascii Chart Dec Hex BinaryDec Hex Binary Char No Parity No parity Ascii Control Codes Appendix D Ascii Chart ContinuationDec Hex Ctrl Key Definition Dec Hex Ctrl Key Definition Char EquivAppendix E IConnect Software Figure E-1 Assigning an IP Address using iConnectFigure E-2 Accessing the iServer’s Home Communication interface skip for embedded ethernet -EIT Appendix F HTTPget Program\iServerhttpget -r -S *02X01\r 192.168.1.2002000 \iServerhttpget -r -S *02X01\r Network read timeoutArp -g fi Same as arp -a 192.168.1.96Appendix G ARP Program Appendix H Telnet Setup Admin PortISeries? Figure H-3 Telnet Setup iServer Help Figure I-1b Serial Tunneling iSeries -EIT Figure I-1a Serial Tunneling iSeries -C4EITRemote iSeries -EIT/-C4EIT Figure I-2 Device-to-Device CommunicationLocal iSeries -EIT/-C4EIT Figure I-3 Serial Multi-Host Connection -C4EIT Tunneling Troubleshooting IPORT, COM Port Redirector IPORT OverviewAppendix J IPORT Figure J-2a Redirect Serial Connection Figure J-3 iPORT Main Window IPORT Configurations Appendix K ILog Software Figure K-1 iLog Software Logging Data for an iSeriesTable K-1 iLog Excel Applications Wireless DevicesNetworked Product ILOG File Alternate ISeriesTable K-2 iLog Error Messages Error # Description Page Page Page Page Page WARRANTY/DISCLAIMER Shop on line at omega.com