Omnitron Systems Technology 10/100M user manual Vlan ID VID, UTP BP a BP B, Vlan Table is Empty

Page 39

4.3.8VLAN Membership Table

The VLAN Membership Table lists the permitted VLAN ID (VID) for each egress port on the module. Only packets that are assigned a VID value that matches one of the egress port’s VID memberships are allowed to egress through the port.

When the Ingress Security is set to High for a specific port, the membership table is used to list the VIDs of the packets that are allowed to ingress that port.

VLAN Membership is accessed by selecting option 5 from the Port configuration screen. The VLAN Membership screen will be displayed.

VLAN Membership - iConverter 10/100M

 

iConverter, Serial Agent

Identifier -

 

 

 

 

 

 

Chassis Number = 1

Slot Number = 1

Model Number = 8919-0

 

VLAN ID (VID)

Fiber

UTP

BP A

BP B

Mngmnt

VLAN TABLE IS EMPTY

 

 

 

 

 

Add new entry (a), Delete entry (d), Edit entry (e), Clear table (c)

Enter Choice, Previous Screen(0), (H)elp, E(x)it >

 

 

 

 

 

 

 

 

VLAN Membership - iConverter 10/100M

 

iConverter, Serial Agent

Identifier -

 

 

 

 

 

 

Chassis Number = 1

Slot Number = 1

Model Number = 8919-0

 

VLAN ID (VID)

Fiber

UTP

Mngmnt

 

 

VLAN TABLE IS EMPTY

 

 

 

 

 

Add new entry (a), Delete entry (d), Edit entry (e), Clear table (c)

Enter Choice, Previous Screen(0), (H)elp, E(x)it >

Page 39

Image 39
Contents Standalone and PLUG-IN Module Table of Contents Overview Port Structure Installation Procedure Configuring DIP-SWITCHES 1.2 SW2 Fiber Full/Half-Duplex FDX/HDX 1.5 SW5 UTP Full/Half Duplex FDX/HDX These DIP-switches are for factory use only Installing PLUG-IN Modules and Connecting Cables Passwords Management Options screen will be displayed Setting IP and Control Preferences Setting the Chassis Number and Name Setting 10/100M Passwords Setting Snmp Preferences Setting SNMPv1/v2c Read and Write Community Names Setting the Snmp Trap IP Host Addresses Vlan ID Page Access the 10/100M Remotely Updating the 10/100M Firmware via the Serial Console Port Verify Operation NMM Detailed Module Configuration8919-0 10/100M LED UTP HDX UTP FDXModule Management Mode Port Configuration Port Access SFP Information A167EC500000 4 802.3ah Parameters OUI UTP Port Vlan Page Tagged Vlan BP B PvidBP a Vlan ID VID UTP BP a BP BVlan Table is Empty Vlan ID +1 Vlan ID CNode Loopback To refresh the Port Statistic screen, press Enter Cable Types 10/100M SpecificationsPossible Causes Troubleshooting GuidePossible Causes Limitation of Warranty Warranty