Omnitron Systems Technology 10/100M user manual To refresh the Port Statistic screen, press Enter

4.3.10Port Statistics

The 10/100M module provides port statistics on both the fiber and UTP port.

The Port Statistics can be viewed by selecting option P from the Module configuration screen.

Module -	iConverter 10/100M				iConverter, Serial Agent
Identifier -
Chassis Number		=	1	Switch	ON Condition	OFF Condition		H/W	Actual
Slot Number		=	1	1: Pause Enabled		Pause Disabled		Off	Off
Model Number		=	8919-0	2: Fiber HDX		Fiber FDX		Off	Off
				3: UTP Manual		UTP Auto-Neg		Off	Off
Serial Number		= xxxxxxxx		4: UTP 10 Mbps		UTP 100 Mbps		Off	Off
Manufacturing Date = xxxxxxxx				5: UTP HDX		UTP FDX		Off	Off
Product Revision		= x		6: Link Propagate		Link Segment		Off	Off
Software Revision = xx				7: Remote Fault		Normal		Off	Off
				8: Symm Fault Det		Normal		Off	Off
LED				9: BP A Enabled		BP A Disabled		On	On
1: Power		= On		10: BP B Enabled		BP B Disabled		On	On
2: Power Supply 1		= Off		11: Not Available
3: Power Supply 2		= Off		12: Slave Only		Master/Slave		Off	Off
4: Power Supply 3		= Off		13: Not Available
5: Fiber Link		= Off		14: Not Available
6: BP Master		= On		15: Not Available
7: UTP 10	Link	= Off		16: Not Available
8: UTP 100 Link		= Off		OAM settings:
9: UTP FDX		= Off		17: IP Protocol State			On
				18: Management Mode			Secure OAM
Toggle Switch(1-16), (I)dentifier, (R)eset, (H)elp, (P)ortStat, Port(C)tl > P
Port Statistic
Module - iConverter 10/100M					iConverter, Serial Agent
Identifier -
Chassis Number		= 1
Slot Number		= 1
Model Number		= 8919-0
			Port Statistics
	-------------------------------------------
			Fiber		UTP
Rx Bytes				0	0
Rx Packets				0	0
Rx Total Packets				0	0
Tx Bytes				0	0
Tx Packets				0	0

Enter Choice, Previous Screen(0), (H)elp, E(x)it >

To refresh the Port Statistic screen, press <ENTER>.

Page 43