Multi-Tech Systems RF802EW manual Upgrade Firmware, To Upgrade your firmware, RouteFinder Manager

Page 56

Upgrade Firmware

Chapter 5 - RouteFinder Manager

click then navigate to and select the file.

6. Click OK to load and apply the settings to the RouteFinder.

Upgrade Firmware

Warning: Upgrade the firmware of your RouteFinder RF802EW only under the advice and direction of the Multi-Tech Technical Support Group. Improperly upgrading the RF802EW may disable the device!

The Upgrade Firmware options allow you to upgrade your RF802EW firmware. The Upgrade Firmware option upgrades the firmware of your RF802EW, not the RouteFinder Manager or Monitor software.

1.From the main Manager dialog box, click Upgrade Firmware.

2.The Upgrade Firmware dialog box displays.

To Upgrade your firmware:

1.Download the latest firmware from the Multi-Tech System’s web site at www.multitech.com.

2.Copy the firmware to the directory containing the RouteFinder Manager program files. Refer to the default Firmware File Directory box to determine the location of the files on your system.

3.Enter the location of the new firmware file in the Firmware File Directory box. RouteFinder Manager will automatically detect the new firmware file name and display it in the Firmware File Name box. The version number of your firmware will display in the Firmware File Version box.

4.Click Upgrade to upgrade your firmware.

5.A message displays stating the upgrade has started.

6.After several minutes, an informational dialog box displays indicating the upgrade was successful.

7.Click OK.

8.From the main Manager dialog box, click Save and Exit.

9.Click Yes to restart the RouteFinder using the new firmware version.

56

Image 56

Contents Model RF802EW Wireless Router/Access Point User GuideUser Guide Record of RevisionsWireless Router/Access Point PATENTSChapter 2 - Hardware Installation Chapter 3 - Software Installation and ConfigurationChapter 1 - Introduction Chapter 5 - RouteFinder ManagerChapter 8 LAN-to-LAN Settings Chapter 9 - TroubleshootingChapter 10 - Service, Warranty and Technical SupportWINIPCFG and IPCONFIG IndexChapter 1 - Introduction The RouteFinder RF802EW IntroductionChapter 1 - Introduction Power 5VDC ResetFront Panel Back PanelConnecting a Remote Site via Cable Modem Connecting a Local Site to the InternetTypical Applications KernalSpecifications WirelessAccess Point Power OutputChapter 2 - Hardware Installation Hardware Installation SafetyChapter 2 - Hardware Installation Unpacking the RF802EWCabling Cabling the RouteFinder RF802EWChapter 3 - Software Installation and Configuration Software Installation and Configuration Software InstallationChapter 3 - Software Installation and Configuration RouteFinder Setup WizardUsing RouteFinder Setup Wizard 2. Click Install Software6. The Setup Wizard Device IP Address dialog box displays Device IP Address Device MAC Address Device Firmware Version8. The Wireless Settings dialog box displays Chapter 3 - Software Installation and Configuration Remote Access PasswordPassword Verification Use Local Client ListRADIUS Access Server IP Address Use RADIUS ServerRADIUS Accounting Server IP Address SecretTelephone Number IP Routing NAT Enabled and IP Routing NAT Disabled12. The Setup Wizard DNS IP Address dialog box displays Select your modem and baudrate as described on the following pages 11. The Setup Wizard Modem Settings dialog box displays14. The Setup Wizard Modem Setting dialog box re-displays Testing your Connection Chapter 4 - Telnet Using Telnet to Configure your RouteFinder Chapter 4 - TelnetRouter Password WAN Ethernet SettingsInternet Access LAN -to- LAN AccessAsync Port Settings Idle TimeoutLogin script Edit login scriptRemote Access Remote Access Port Settings IP Assigned MethodAuthentication Method Chapter 4 - Telnet Assign Remote IPClient Filter Settings Load Default SettingsRADIUS Access Server IP Router DNS IP AddressDiagnostic Type any key to return to the main menuChapter 5 - RouteFinder Manager RouteFinder Manager Chapter 5 - RouteFinder ManagerGeneral Settings 2. Click PPP Settings WAN Ethernet SegmentAsync Port LAN Ethernet SegmentIP Routing NAT Enabled Tel NumberExternal Port IP Assign Remote Site an IP Address2. Click Remote Authentication Settings 3. The Remote Connection Authentication dialog box displaysCallback Settings Allow Remote Dial-InRemote Connection Authentication Settings Use Local SettingClient Information No CallbackSecret Confirmed Re-enter your Shared Secret Use Radius AuthenticationAssign a specific IP address for this user Remote Access Settings Remote Client AuthenticationIP Assigned Method for Remote Clients Assign an IP Address AutomaticallyEnable IP Mapping - Virtual Server Port Settings BaudrateEdit Login Script for Remote Access Writing a login script for IP Routing1. From the Port Settings, click Edit Login Script Send and SH# Login Script Meaning of Each Login Script CommandLogin Script Example 3 Script for Unreliable ISP 2nd ISP backupModem String Settings Dial-up/Hang-up SettingsLAN DHCP Server Chapter 5 - RouteFinder Manager Individual Port OptionsDial-up Retry Options DNS IP AddressChapter 5 - RouteFinder Manager IP Address Pool IP Address Mapping ReservationDelete Routing SettingsStatic Routing What is the purpose of the routing table? Routing TablePC 1 WAN Ethernet RF802EW-1 LAN Ethernet WAN Ethernet RF802EW-2 LAN Ethernet PC 2Filter Settings TCP/IP Service PortPackets Defined by TCP/IP IP AddressEnable Client Filter Settings 2. Click Client Filter SettingsPackets defined by User 2. In the Packets defined by User list, select From LAN or From WANRemote Clients Applies to Remote Access Ports 5. Enter the TCP/UDP Port Number and click Add6. Click Privileged Clients LAN Local Client ListWireless Settings Encryption WEPDevice Name and Password Device PasswordRefresh Device List Device NameTo save your settings to a file Save Settings to FileLoad Settings Upgrade Firmware To Upgrade your firmware3. Record the information if necessary and click OK to exit General Diagnostic1. From the main Manager dialog box, click General Diagnostic Chapter 6 - RouteFinder Monitor RouteFinder Monitor Test ConnectionRunning RouteFinder Monitor Chapter 6 - RouteFinder MonitorTerminate Connection Save to File3. Select Disconnect Port 1 or Disconnect Port 4. Click Terminate ConnectionIP Address/Name Save NowAutosave Overwrite database fileEvent Messages TCP/IP TabDevice Power Turned On Power-On-TimeTime Tab Total Connection TimeAsync Port Modem Power Status TabWAN Ethernet Modem ReadyStatistics Tab NameTx Bytes Rx BytesChapter 7 - LAN Client Settings LAN Client Settings Setting up Remote Access ClientsAccessing a Windows NT Server Chapter 7 - LAN Client SettingsWindows 95/98 1. Click Start Settings Control Panel Adding the dial-up adapter NT Server ConnectionWin95 Win98Adding TCP/IP NT Server Connection Windows NTWindows 95/98/NT WinNTAdding Client for Microsoft Networks NT Server Connection Windows 95/98Dial-up Adapter Windows 95/98 Set up Properties of Components NT Server ConnectionSet Your Primary Network Logon NT Server Connection Chapter 7 - LAN Client Settings Network Client Windows 95/98 Identification Windows 95/98Chapter 7 - LAN Client Settings Access Windows 95/98 2. Select Share-Level access controlMake Your New Connection NT Server Connection Set Dial-up type NT Server ConnectionAdding the dial-up adapter Novell Server Connection Accessing a Novell ServerDial in to your network NT Server Connection Chapter 7 - LAN Client Settings Adding IPX/SPX Novell Server Connection Network Client Windows 95/98 Set Up Properties of Components Novell Server ConnectionAdding Client for NetWare Networks Novell Server Connection Chapter 7 - LAN Client Settings 7. Click Properties Set Your Primary Network Logon Windows 95/98Set Your Access Control Novell Server Connection Make Your New Connection Novell Server ConnectionSet Dial-up type Novell Server Connection Dial in to your network Novell Server ConnectionAdding the dial-up adapter Novell/NT Server Connection Accessing a Windows NT Server and a Novell NetWare ServerWindows 95/98/NT 1. Click Start Settings Control Panel Adding TCP/IP Novell/NT Server Connection Adding Client for Microsoft Networks Novell/NT Server Connection Adding IPX/SPX Novell/NT Server Connection Adding Client for NetWare Networks Novell/NT Server Connection Set Your Primary Network Logon Novell/NT Server ConnectionSet Up Properties of Components Novell/NT Server Connection Network Protocol Windows 95/98 2. Click PropertiesMake Your New Connection NT/Novell Server Connection Set Your Access Control2. Select the Share-Level access control option Accessing a Unix Server Set Dial-up type NT/Novell Server ConnectionDial in to your network NT/Novell Server Connection Adding the dial-up adapter Unix Server ConnectionChapter 7 - LAN Client Settings Set Up Properties of Components Unix Server Connection Adding TCP/IP Unix Server ConnectionDial in to your network Unix Server Connection Make Your New Connection Unix Server ConnectionSet Dial-up type Unix Server Connection 3. Double-click Make New Connection Make New Connection Windows 2000 only2. Double-click the Network and Dial-up Connections folder Chapter 8 LAN-to-LAN Settings LAN-to-LAN Settings Setting up LAN-to-LAN RoutingUsing the Find Computer command Setting up a Windows machine to share filesUsing LMHosts Chapter 9 - Troubleshooting Troubleshooting Common ProblemsChapter 9 - Troubleshooting Problem #1Chapter 9 - Troubleshooting Problem #3 Problem #4Create a backup of the file c\windows\system\oleaut32.dll Problem #5Problem #8 After installing my RF802EW, my modem connection seems to be slowerProblem #9 Problem #10Chapter 10 - Service, Warranty and Technical Support Addendum for North American Products Limited WarrantyChapter 10 - Service, Warranty and Technical Support Out of Warranty Repair Costs Addendum for International ProductsSoftware User License Agreement IMPORTANT - READ BEFORE OPENING THE SOFTWARE PACKAGESINGLE-USER SOFTWARE LICENSE AGREEMENT MULTI-TECH SOFTWARE LICENSE AGREEMENTThis Agreement shall be governed by the laws of the State of Minnesota Online Warranty Registration Using emailTechnical Support Contacting Technical SupportEmail info@thesupplynet.com Ordering AccessoriesAbout the Internet Appendixes Appendix A - Regulatory Compliance Information Class B Statement FCC PartIndustry Canada AppendixesWINIPCFG and IPCONFIG Appendix B - Tools for your RF802EWRouteFinder Monitor PINGTRACERT Appendix C - Cabling Diagrams Pin Circuit Signal NameWAN/LAN Cables Serial CableGlossary D DHCP Dynamic Host Configuration Protocol GlossaryB Baudrate DNS DomainNameSystemISP Internet Service Provider Glossary IP AddressesISDN TA L LAN Local Area NetworkNetworkAddress P PacketPort Number ProtocolGlossary T TCP/IP Transmission Control Protocol/Internet Protocol U UDP User Datagram ProtocolIndex Index

Related manuals

Manual 28 pages 29.47 Kb

Manual 28 pages 36.04 Kb