Multi-Tech Systems RF802EW Make Your New Connection Unix Server Connection, LAN Client Settings

Chapter 7 - LAN Client Settings

Make Your New Connection (Unix Server Connection)

Windows 95/98:

1.Double-click My Computer.

2.Double-click the Dial-Up Networking folder.

3.Double-clickMake New Connection (or Add New Connection, Win98).

4.Follow the on-screen instructions to configure your connection.

Windows NT:

1.Double-click My Computer.

2.Double-clickDial-Up Networking.

3.When the Dial-Up Networking dialog box opens, click Install.

4.Follow the on-screen instructions to configure your connection.

Set Dial-up type (Unix Server Connection)

Windows 95/98:

1.Right-clickthe newly created connection icon, then click Properties; the My Connection dialog box opens.

2.On the General tab, click Server Type. The Server Types dialog box opens. Select PPP: Windows 95, Windows NT 3.5, Internet.

3.Select only the Log on to network, Enable software compression, and TCP/IP check boxes. Note: do not change any other items that are already selected.

Dial in to your network (Unix Server Connection)

Windows 95/98:

1.You are ready to dial in to your network.

2.Double-click the new connection icon. The Connect To dialog box opens.

3.Enter the user name (if necessary) and password configured for you on the RF802EW.

Note: If your particular situation permits, select the Save password check box.

4.Click Connect.

5.After connecting to the RF802EW, you can access the same services and resources as if you were connected to the network locally.

91