Multi-Tech Systems RF802EW Front Panel Description, Back Panel Description, Power 5VDC

Chapter 1 - Introduction

Front Panel

RF802EW Front Panel

Front Panel Description

Link Lights when the LAN client is correctly connected to the 10/100 LAN.

ACT Blinks when transmitting or receiving packets.

LAN Lights when a successful connection to the 10/100 LAN is established.

WLS Lights when a wireless connection is established.

Serial Lights when the Serial async port is properly connected to a remote site.

WAN Lights when a successful connection to the 10Base-T WAN is established.

Status Blinks when updating flash ROM or rebooting.

Power Lights when power is being supplied to the router.

Back Panel

	RF802EW Back Panel
Back Panel Description
Power 5VDC	The 5V DC power socket is used to connect the device to the AC power
	adapter.
10 BT WAN	The WAN port is used to connect the router to a DSL or Cable modem.
SERIAL	The Serial async port connects the router to a standard modem (optional).
10/100M	Connects the Router to a 10/100 Base-T Ethernet LAN.
Reset	Press and hold for three seconds to reset the router to factory defaults.
Uplink/Normal	Slide the switch to the Uplink position to use the LAN port to expand your
	network by connecting a network cable to another router, switch, or hub. To
	connect the port to a LAN client workstation, slide the switch to the Normal
	position.

8