6.4Reset Options
The Reset Options menu allows you to reset the unit, the data channel, or return to the previous menu or to the Main Menu.
Reset Options
1 - Reset Unit
2 - Reset Data Channel
M - Main Menu
P - Previous Menu
Selection : _
To reset the unit, enter 1 and press ENTER. To reset the data channel, enter 2 and press ENTER. To return to the previous menu, enter P and press ENTER. To return to the Main Menu, enter M and press ENTER.
6.5Diagnostic Tests
The Diagnostic menu allows you to run two loopback tests, a watch dog test, display the product and firmware identification or return to the previous menu or the Main Menu.
Diagnostics
1 | - | Loop Tests |
2 | - | Memory Tests |
3 | - | Watch Dog Test |
4 | - | Product and Firmware ID |
5 | - | Flash Firmware Upgrade |
M - | Main Menu | |
P - Previous Menu
Selection : _
6.5.1 Loop Tests
The Loop Tests menu allows for selection of two loopback tests, or return to the previous menu or to the Main Menu. The Data Port Loop- back Test tests the interface between the data device and the Multi- FRAD. The Trunk Loopback Test tests can be used both locally and remotely. When it is used locally, the internal DSU should be set to
82