Lantronix 900-588 manual Available fields, enter or modify the following information

5: Configuration Using Web Manager

2. In the available fields, enter or modify the following information:

Connect Protocol

Connect Protocol Setting	Description
Protocol	From the drop-down menu, select TCP.

Connect Mode: Passive Connection

Passive Connection Mode	Description
Settings
Accept Incoming	Select Yes to accept incoming connections. The default is Yes.
Password Required	Determines whether a password is required for an incoming
	passive connection. This field is not available when a password is
	set for Telnet mode.
Password	If Password Required was set to Yes, enter the password for
	passive connections.

Connect Mode: Active Connection

Active Connection Mode		Description
Settings
Active Connect		Select None to disable Active Connect. Otherwise, indicate the
		connection type from the drop-down list:
		 With Any Character: Attempts to connect when any
		character is received from the serial port.
		 With Active Mdm Ctrl In: Accepts external connection
		requests only when the Modem Control In input is
		asserted.
		 With Start Character: Attempts to connect when it
		receives a specific start character from the serial port. The
		default start character is carriage return.
		 Manual Connection: Attempts to connect when directed
		by a command string received from the serial port.
		 Auto Start: Automatically connects to the remote IP
		address and port after booting up.
Start Character		If Active Connect is set to With Start Character, enter the start
		character in this field.
Modem Mode		Indicates the on-screen response type when in Modem Mode (if
		Modem Mode is enabled).
Show IP Address After Ring	Indicates whether to display the remote IP address upon
		connection. The default setting is Yes.

Micro125 User Guide 30