Lantronix 900-588 manual Configuration via Telnet or Serial Port Setup Mode

Page 4

Host List Configuration _______________________________________________ 24

Retry Settings___________________________________________________ 25

Host Information_________________________________________________ 25

Channel 1 and Channel 2 Configuration _________________________________ 25

Serial Settings __________________________________________________ 26

Connection Settings - TCP ________________________________________ 29

Connection Settings - UDP ________________________________________ 32

Apply Settings______________________________________________________ 33

Apply Defaults _____________________________________________________ 34

6. Configuration via Telnet or Serial Port (Setup Mode)

35

Accessing Setup Mode_______________________________________________ 35

Telnet Connection _______________________________________________ 35

Serial Port Connection ____________________________________________ 36

Exiting Setup Mode _________________________________________________ 37

7. Setup Mode: Server Configuration

38

Server Configuration (Option 0) ________________________________________ 38

IP Address ________________________________________________________ 38

Set Gateway IP Address _____________________________________________ 39

Netmask: Number of Bits for Host Part __________________________________ 39

Set DNS Server IP Address ___________________________________________ 39

Change Telnet/Web-Manager Password _________________________________ 40

DHCP Name_______________________________________________________ 40

8. Setup Mode: Channel Configuration

41

Channels__________________________________________________________ 41

Baudrate __________________________________________________________ 41

I/F (Interface) Mode _________________________________________________ 42

I/F Mode __________________________________________________________ 42

Flow _____________________________________________________________ 43

Port Number _______________________________________________________ 43

Connect Mode _____________________________________________________ 44

a) Incoming Connection ___________________________________________ 45

b) Response____________________________________________________ 45

c) Active Startup_________________________________________________ 45

d) Datagram Type _______________________________________________ 48

e) Modem Mode _________________________________________________ 48

Send the Escape Sequence (+++) in Modem Mode ________________________ 50

Show IP addr after 'RING' ____________________________________________ 51

Auto Increment Source Port ___________________________________________ 51

Remote IP Address _________________________________________________ 51

Remote Port _______________________________________________________ 51

DisConnMode______________________________________________________ 51

Flush Mode (Buffer Flushing) __________________________________________ 53

Pack Control _______________________________________________________ 53

Packing Interval _________________________________________________ 54

Trailing Characters_______________________________________________ 54

Micro125 User Guide

4

Image 4
Contents User Guide Lantronix Corporate Headquarters Technology Drive Irvine, CA 92618, USA Toll Free Phone FaxTechnical Support Sales Offices Date Rev Firmware CommentsTable of Contents Configuration via Telnet or Serial Port Setup Mode Setup Mode Advanced Settings Problems and Error Messages Technical SupportList of Figures List of TablesUsing This Guide Purpose and AudienceChapter Summary Remaining chapters in this guide includeDeviceInstaller Online Help Additional DocumentationDocument Description Micro125 Integration GuideCapabilities IntroductionApplications Configuration Methods Protocol SupportAddresses and Port Numbers Hardware AddressIP Address Port NumbersPhysically Connecting the Unit Getting StartedRequired Information 10/100 EthernetGetting Started Using DeviceInstaller Installing DeviceInstallerTo install DeviceInstaller Assigning an IP AddressAccessing the Micro125 Using DeviceInstaller Viewing the Current ConfigurationDeviceInstaller provides a view of the units configuration To view the units current settingsComments Device FamilyType Hardware AddressUpgradeable Configurable PinsSetup Supports 230K Baud FirmwareConfiguration Using Web Manager Accessing Web-Manager Using DeviceInstallerWeb-Manager Login Window Lantronix Web-ManagerNetwork Configuration Network ModeAutomatic IP Address Configuration Select Obtain IP address automaticallyStatic IP Address Configuration Select Use the following IP configurationEnter the following as necessary To assign an IP address manuallyEthernet Configuration Ethernet Settings DescriptionTo specify how data will be transmitted Auto NegotiateTo configure the Micro125’s device server settings Server ConfigurationServer Configuration Description Settings Host List Configuration To configure the Micro125’s host listAdvanced Settings Description On the main menu, click HostlistChannel 1 and Channel 2 Configuration Retry SettingsRetry Settings Description Host InformationSerial Settings To configure the channel’s serial settingsChannel Setting Description Port Settings DescriptionPack Control Settings Description Flush Input Buffer Settings Description Flush Output Buffer Description SettingsWith Active Connect With Passive ConnectConnection Settings TCP To configure a channel’s TCP settingsConnect Protocol Setting Description Passive Connection Mode Description SettingsActive Connection Mode Description Settings Available fields, enter or modify the following informationCommon Option Settings Description Endpoint Configuration Description SettingsDisconnect Mode Settings Description Connection Settings UDP To configure a channel’s UDP settingsInactivity Timeout Check EOT Ctrl-DDatagram Mode Description Settings Apply SettingsConnection Protocol Description Apply Defaults Applying SettingsAccessing Setup Mode Configuration via Telnet or Serial Port Setup ModeTelnet Connection To establish a Telnet connection Serial Port ConnectionClick OK. The following information displays Exiting Setup Mode To exit setup mode, utilize one of the following two optionsSetup Mode Server Configuration Server Configuration OptionThis chapter explains how to configure the network settings IP AddressSet Gateway IP Address Netmask Number of Bits for Host PartSet DNS Server IP Address Standard IP Network NetmasksChange Telnet/Web-Manager Password Dhcp NameChannels Setup Mode Channel ConfigurationBaudrate Interface Mode Following table displays available I/F Mode optionsMode Option Common I/F Mode Setting Binary HexPort Number FlowUse the following table to select flow control options Connect Mode Enter Connect Mode options in hexadecimal notationConnect Mode Options Connect Mode OptionResponse Active StartupManual Connection Address Example C121.2.4.5/1C28.10/12 C0.0.0.0/0To enable the hostlist Hostlist OptionModem Mode Modem Mode DescriptionDatagram Type Datagram Type DescriptionModem Mode Messages Full Verbose Command was executed without errorMessage Meaning Network connection has been establishedSend the Escape Sequence +++ in Modem Mode Modem Mode Function CommandShow IP addr after Ring Auto Increment Source PortRemote IP Address Remote Port11. Disconnect Mode Options Disconnect Mode OptionPack Control Flush Mode Buffer FlushingOption DisConnTime Inactivity Timeout Packing IntervalTrailing Characters Send CharactersSend Characters Channel Port PasswordTelnet Terminal Type Setup Mode Advanced Settings Expert Settings OptionDefault settings are listed below Device Details Settings DescriptionARP Cache Timeout in Seconds Disable Monitor Mode at BootupTCP Re-transmission Timeout Enable Alternate MACSecurity Settings Option Disable SnmpDisable Telnet Setup Select 6 to configure security settingsDisable Tftp Firmware Upgrade Disable Port 77FE HexDisable Web Server Disable Web SetupEnable Enhanced Password To configure AES encryption on the Micro125Default Settings Option Channel 1 and Channel 2 Configuration DefaultsExpert Settings Defaults Channel Setting Default ConfigurationSecurity Settings Defaults Security Setting Default ConfigurationFirmware Upgrades Using Tftp Graphical User InterfaceObtaining Firmware Reloading Firmware To download new firmware from a computerUsing Tftp Command Line Interface Firmware UpgradesTo recover firmware Monitor Mode Entering Monitor Mode Using the Serial PortEntering Monitor Mode Using the Network Port Monitor Mode CommandsMonitor Mode Commands Command Command Name FunctionG0, G1, ....,Ge, Gf S0, S1,...,Se, SfResponse Meaning Problems and Error Messages TroubleshootingProblem/Message Reason Solution Troubleshooting Caps Lock is not onCorrectly to make a good socket Technical Support Technical Support USPhone 800 422-7044 US Only 949 Technical Support Europe, Middle East, and AfricaBinary to Hexadecimal Conversions Converting Binary to HexadecimalConversion Table Decimal Binary HexScientific Calculator