Lantronix 900-588 manual Setup Mode Advanced Settings, Expert Settings Option

9. Setup Mode: Advanced Settings

Expert Settings (Option 5)

Note: You can change the Enable alternate MAC setting using telnet or serial connections only. It is not available through the Web-Manager.

CAUTION: Only an expert should change these parameters. You must definitely know the consequences the changes might have.

Figure 9-1. Expert Settings

TCP Keepalive time in s (1s – 65 s; 0s-disable): (45) ?

ARP Cache timeout in s (1s – 600s) : (600) ?

Disable Monitor Mode @ bootup (N) ?

HTTP Port Number : (80) ?

MTU Size (512 – 1400): (1400) ?

TCP Re-transmission Timeout (500 - 4000) (ms): (500) ?

Enable alternate MAC (N) ?

Ethernet connection type: (0) ?

The default settings are listed below:

Table 9-1. Expert Settings: Details Settings

	Device Details Settings		Description
	TCP Keepalive time in s	45
	(1s – 65s; 0s=disable)
	ARP Cache timeout in s (1s – 600s)	600
	Disable Monitor Mode @ bootup		No
	HTTP Port Number (1-65535)	80
	MTU Size (512 – 1400)		0 (resulting in an operational value of 1400)
	TCP Re-Transmission Timeout		500 (msec)
(500-4000)
	Enable alternate MAC		No (OEM use only)
	Ethernet connection type		0 (resulting in auto-negotiation)

TCP Keepalive Time in Seconds

This option allows you to change how many seconds the unit waits during a silent connection before attempting to see if the currently connected network device is still on the network. If the unit gets no response, it drops that connection.

TCP Keepalive time in s (1s – 65s; 0s=disable): (45)? _

Micro125 User Guide 56