Lantronix 900-588 manual Apply Settings, Connection Protocol Description

		5: Configuration Using Web Manager
Connect Protocol
	Connection Protocol	Description
	Protocol	Select UDP from the drop-down menu.
Datagram Mode
	Datagram Mode	Description
	Settings
	Datagram Type	Configures the remote IP or network broadcast address and the
		remote port. Enter 01 for directed or broadcast UDP. The default
		setting is 00.
	Accept Incoming	Select Yes to accept incoming UDP datagrams.
Endpoint Configuration
	Endpoint Configuration	Description
	Settings
	Local Port	Enter the local port number.
	Remote Port	Enter the port number of the remote device.
	Remote Host	Enter the IP address of the remote device.
	Use Broadcast	Select to broadcast the UDP datagram. The default is not to
		broadcast.
		Note: Datagrams are sent as subnet-directed broadcasts.
	Device Address Table	The table is enabled when Datagram Type is set to FD. Enter values
		between 1 and 255 to identify units on the local network of device
		servers.
		Note: Lantronix Tech Support supports Datagram type 01. Datagram
		Type FD is for OEM use.

3.When you are finished, click the OK button.

4.On the main menu, click Apply Settings.

Apply Settings

1.To save and apply the configuration changes to the device server, click the Apply Settings button.

Note: Clicking OK on each page does not change the configuration on the device. Clicking the OK button tells the MatchPort what changes to use; the Apply Settings makes the changes permanent and reboots the Micro125.

Micro125 User Guide 33