Lantronix MPS100, LPS1-2, LPS1-T manual Code Meaning Remedy

NetWare Configuration		NetWare Host Troubleshooting
	Table 5-3:NDS Errors from the File Server
Code	Meaning	Remedy
0xfffffda7	Object could not be	Check the MPS server name, DScontext, and DStree to
	found in the given	ensure the printer server is set up correctly with PCONSOLE.
	context
0xfffffda5	Requested attribute	Use PCONSOLE to ensure that the MPS has associated print-
	could not be found	ers and the printers have associated queues.
0xfffffd69	DS Database is locked	An administrator is probably updating the database. Wait a
		few minutes and issue the Set Protocol NetWare Reset com-
		mand.
0xfffffd63	Invalid password	The password for the print server object under PCONSOLE
		must match the MPS login password. If the login password
		on the MPS is left as the default (access), there should be no
		password for the print server object.
0xfffffd54	Secure NCP violation	Turn down the NCP packet signature level so that it is not
		required.

		Table 5-4:NDS Printing Errors
Bit	Meaning	Remedy
1	Server out of memory	Turn the MPS off, wait a few seconds, and turn it back on. Disable
		unused protocols and/or remove fileservers without print queues
		from the NetWare access list.
2, 3	Unexpected response	Report the problem to Lantronix Technical Support.
	from file server
4	No printers found for	Ensure that there are printers for the MPS, and the printer names
	the MPS	match the service names on the MPS.
5	No printer queue found	Ensure that the printers have associated queues.
6	Login failed	Ensure there is a print server object configured with the same
		name as the MPS.
7	Authentication failed	Ensure the MPS login password is the same as the print server
		object password. If the MPS is using the default password
		(access), there should be no print server object password.
8	Server cannot attach to	Check the NDS partitions, replicas, and volumes to ensure the file
	queue	server where the queue lives has the correct information.

5-5