Lantronix MPS100, LPS1-2, LPS1-T manual Pinouts, Ethernet Connector, Parallel Connectors

C: Pinouts

C.1 Ethernet Connector

Figure C-1:RJ45 Ethernet Connector

1 2 3 4 5 6 7 8	1	TX+
	2	TX-
	3	RX+
	6	RX-

C.2 Parallel Connectors

Lantronix uses standard Centronics parallel connectors.

For optimum performance of your MPS, Lantronix recommends the use of high quality parallel cables. Choose one of the following:

◆A Lantronix parallel port cable, part number #500-011 (6 feet).

◆Any other brand of IEEE Std. 1284-1994compliant cable. Compliant cables can easily be identified by the permanent label “IEEE Std. 1284-1994 compliant” printed on the cable.

Note: Non-compliant cables have the same type of connectors but different electrical characteristics.

C-1