Lennox Hearth manual Charging the Batteries, To charge the batteries inside the PB42

Charging the Batteries

There are several ways to charge the PB42 batteries:

•Connect AC power to the printer and charge the batteries while they are inside the PB42.

•Place the PB42 with batteries installed in the 4-bay charger (Model AC10).

•Charge the batteries in the CK60/PB42 quad battery charger (Model AC4).

For information on charging your batteries in the 4-bay charger, see the PB42 4-Bay Charger Quick Start Guide (P/N 930-118- 001). For information on charging your batteries in the quad battery charger, see the CK60/PB42 Quad Battery Charger Quick Start Guide (P/N 962-000-044).

It takes about 4 hours to charge the batteries inside the PB42 with the power cord attached. To charge the batteries inside the PB42, you need:

•an Intermec 12 VDC power supply (Model 073573).

•an AC power cord.

To charge the batteries inside the PB42

1Install the batteries in the PB42. For help, see the previous section, “Installing the Batteries.”

2Connect the power supply to the DC power connector on the printer.