Lennox Hearth manual Cleaning the Printer, To cold boot the PB42

Page 35

To cold boot the PB42

1Disconnect the PB42 from power source if externally powered.

2Remove the batteries from the PB42.

3Insert the batteries back into the PB42.

4Reconnect external power if powered externally.

Cleaning the Printer

To properly maintain your PB42, you should clean it at the recommended intervals.

To avoid possible personal injury or damage to the printer, never insert any pointed or sharp objects into the printer.

Use only cleaning agents specified next. Intermec is not responsible for damage caused by any other cleaning materials used on this printer. Clean the printer with a cotton swab saturated with alcohol.

Tear bar

Paper

sensorPrinthead

Platen roller

PB42 Portable Receipt Printer: Identifying the parts of the PB42 to clean regularly.

PB42 Portable Receipt Printer User’s Guide

35

Image 35

Contents Users Guide PB42 Portable Receipt Printer User’s Guide Version Number Date Description of Change Document Change RecordPB42 Portable Receipt Printer User’s Guide Contents Specifications Accessories for the PB42 Before You Begin Safety IconsGlobal Services and Support Choose this option ServiceDescription To download documents Who Should Read This Document?Related Documents PB42 Portable Receipt Printer User’s Guide Identifying the Parts of the Printer Learning About the PB42 Portable Receipt PrinterWhat’s New? Button Function Understanding How to Use the PB42 ButtonsUnderstanding the Control Panel State Description Understanding the PB42 LightsLight Sound Occurs When Understanding the Printer SoundsUnderstanding the Printer Sounds Light State DescriptionTo install the batteries Using the BatteriesInstalling the Batteries Batteries Battery cover To charge the batteries inside the PB42 Charging the BatteriesAC outlet AC power cord Power Loading Media Extending Battery LifeMedia Specifications for the PB42 Specification DimensionsTo load media Media supports To print the configuration test Printing a Configuration Test00A0960AF16F Establishing Communications With a Host Configuring the PB42To set up Bluetooth communications Setting Up Bluetooth CommunicationsSetting Up Serial Communications To connect the PB42 to a PC Serial Port Settings on the PB42Parameter Default Setting To cancel a print job Cancelling a Print JobTo load new firmware Upgrading the Printer FirmwareSetting Select This Value TroubleshootingCalling Product Support Possible Solution Printer Problems and Possible SolutionsPrinter Problems and Possible Solutions ProblemPrinter Problems and Possible Solutions Cold Booting the PB42 To cold boot the PB42 Cleaning the PrinterPrinter Part Cleaning Method Cleaning Interval Cleaning the PB42Power Specifications SpecificationsLabel and Printing Specifications Physical DimensionsSetting Default Value Factory Default SettingsAC4 Quad Charger Model AC4 Accessories for the PB42PB42 DC Power Cable P/N Page 074573-003