![](/images/new-backgrounds/1267688/26768845x1.webp)
Printing a Configuration Test Page
After you have loaded the media in the printer, you are ready to print out the configuration test page. Use this information for reference when installing your PB42 and to verify proper printer operation. If you cannot get the configuration test page to print, see “Troubleshooting” on page 30 for help.
To print the configuration test page
•Press and hold the Feed and Radio buttons until the printer emits the Button sound and the page starts to print.
The printer prints out a configuration test page containing information about the printer configuration, the wired configuration, the wireless configuration and the fonts and graphics available on the printer.
| Printer Configuration- | ||||
Serial Number |
| : | 12345678901 | ||
Firmware |
| : | PB42F3932_032806 (Ver 3.32) | ||
Hardware |
| : | |||
Batteries |
| : | #1 8.5V | #2 8.5V | |
Low Battery Indicator: | 6.6V | ||||
Dark | Adjust |
| : | Level 4 (0%) | |
Emulation |
| : | PB42_REL2 | ||
Temperature |
| : | 34C |
| |
Allow Messages from Printer: Off | |||||
Wired |
| Configuration: | |||
Baud | Rate | : |
| 115200 |
|
Parity | : |
| None |
| |
Data | Bits | : |
| 8 |
|
Stop | Bits | : |
| 1 |
|
Flow | Control : |
| Hardware |
|
Example of Printer and Serial Port Configuration Settings
PB42 Portable Receipt Printer User’s Guide | 23 |