Lennox Hearth manual Configuring the PB42, Establishing Communications With a Host

Configuring the PB42

You can configure several settings on the PB42 by using Intermec Settings from your CK60 or 700 Computer. Here are some of the settings you can configure for the PB42 from your handheld computer:

•Darkness adjust

•Set low battery indicator

•Bluetooth communications

•Restore factory defaults

Intermec Settings is available as part of the operating system upgrade for your CK60 or 700 Computer. You can download the upgrade files for your computer from the Intermec web site at www.intermec.com.

You can also find all of the same settings you can configure in Intermec Settings in the PB42 Programmer’s Reference Manual. The reference manual explains each of the commands and lists the options. You can download the reference manual from the Intermec web site at www.intermec.com.

Establishing Communications With a Host

The PB42 must establish communications with a host that will send the data for the printer to print. The PB42 provides two ways to communicate with a host:

•Bluetooth communications

•Serial communications

Bluetooth communications is the default setting for the PB42.