Cancelling a Print Job, To cancel a print job

Cancelling a Print Job

You can cancel or stop a print job at any time during the printing process. You may find this feature helpful if you make a mistake entering data or send incomplete information. This procedure only works if you are in the process of sending a print job or the printer is currently printing a print job. Otherwise, pressing both buttons will print the configuration test page information.

To cancel a print job

1Press and hold the Feed and Radio buttons until the printer beeps. The printer prints out the message “Print Job(s) Cancelled by User” and asks you to wait a few seconds.

2Cancel the print job from the CK60, 700, or host PC. The PB42 clears the print job and warm boots or resets itself.

3Start sending print jobs to the PB42 again when you see the message “Printer Online.”

Downloading Fonts, Graphics, and Upgrades to the PB42

You can download fonts, graphics and firmware upgrades to the PB42 from your handheld computer using files available from the Intermec web site. There are two ways to download files to your PB42:

•You can download a self-extracting cabinet files (.cab) to copy onto your handheld computer. When you double-click the

.cab file, the handheld computer sends the files down to the PB42.

•You can download a SmartSystems bundle (.exe) to your PC and use SmartSystems Foundation to send the files down to multiple PB42s. SmartSystems Foundation is available from the Intermec web site at www.intermec.com/smartsystems.

To download fonts, graphics and upgrades using the .cab file

1Download the PB42 font, graphics, or firmware upgrade .zip file from the Intermec web site to your desktop PC.

2Unzip the file on your desktop PC.

28	PB42 Portable Receipt Printer User’s Guide