LevelOne WBR-3404TX user manual Procedure for Hardware Installation, Rear Panel

Page 11

2.1.2. Rear Panel

	Figure 2-2 Rear Panel
Ports:
Port	Description
5VDC	Power inlet: DC 5V, 1.5A (minimum)
WAN	the port where you will connect your cable (or DSL) modem or
	Ethernet router.
Port 1-4	the ports where you will connect networked computers and other
	devices.
PRINTER	USB Printer Port (Optional)

2.2 Procedure for Hardware Installation

1.Decide where to place your Wireless Broadband Router

You can place your WBR-3404TX on a desk or other flat surface, or you can mount it on a wall. For optimal performance, place your Wireless Broadband Router in the center of your office (or your home) in a location that is away from any potential source of interference, such as a metal wall or microwave oven. This location must be close to power and network connection.

11

Image 11

Contents LevelOne Trademarks CopyrightCE Declaration of Conformity FCC Interference StatementTable of Contents Firmware Upgrade Functions and Features DMZ Host supported Universal Plug and Play UPnP supportedVirtual Server supported User-Definable Application Sensing TunnelFront Panel Packing ListPanel Layout 802.1X supportedUSB Reset Rear Panel Procedure for Hardware InstallationDecide where to place your Wireless Broadband Router Power on Setup LAN connectionSetup WAN connection Connecting this product with your printerInstall the Software into Your Computers Make Correct Network Settings of Your ComputerPage Page Page Start-up and Log Configuring LevelOne WBR-3404TXStatus Wizard Page Basic Setting Primary Setup WAN Type, Virtual Computers Press Change Dynamic IP Address Static IP AddressPptp PPP over EthernetPage Virtual Computers Press More Dhcp ServerPage Wireless Setting, and 802.1X setting Radius Shared Key 802.1XEncryption Key Length Radius ServerChange Password Forwarding Rules Virtual Server Special AP Non-standard FTP port UPnP SettingMiscellaneous Items IP Address of DMZ HostSecurity Settings Packet Filter Example Inbound FilterThey can do everything block nothing Others are all blocked Example Page Domain Filter Example URL Blocking URL Blocking EnablePage MAC Address Control IP Address Control tableMAC Address ∙ Method VPN setting∙ Max. number of tunnels item ∙ Tunnel nameFunction of Buttons ∙VPN Settings IKEBasic setup Local subnet Remote gateway Local netmaskRemote subnet Remote netmask∙VPN Settings Set IKE Proposal Encapsulation protocol ∙VPN Settings -Set IPSec ProposalIPSec Proposal index IPSec proposal Discard Ping from WAN side Remote Administrator Host/PortAdministrator Time-out Advanced Setting Time Zone System TimeGet Date and Time by NTP Protocol Time ServerSmtp Server IP and Port Mail Alert EnableSystem Log IP Address for SyslogMail Subject Dynamic DNSExample Set Community Snmp SettingEnable Snmp Get CommunityPage Routing Table Page Toolbox You can View system log by clicking the View Log button Firmware Upgrade Reboot Backup SettingReset to default Domain Name or IP address for Ping Test MAC Address for Wake-on-LANPrint Server Configuring on Windows 95/98 PlatformsPage Page Configuring on Windows NT Platforms Configuring on Windows 2000 and XP Platforms Select Ports page, Click Add Port… Page Select Custom, then click Settings… Page Apply your settings Page Configuring on Unix based Platforms Install TCP/IP Protocol into Your PC Appendix a TCP/IP Configuration for Windows 95/98Set TCP/IP Protocol for Working with NAT Router Page Page Don’t input any value in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page