LevelOne WBR-3404TX user manual Backup Setting, Reset to default, Reboot

Page 67

4.8.3 Backup Setting

You can backup your settings by clicking the Backup Setting button and save it as a bin file. Once you want to restore these settings, please click Firmware Upgrade button and use the bin file you saved.

4.8.4 Reset to default

You can also reset this product to factory default by clicking the Reset to default button.

4.8.5 Reboot

You can also reboot this product by clicking the Reboot button.

67

Image 67

Contents LevelOne Trademarks CopyrightCE Declaration of Conformity FCC Interference StatementTable of Contents Firmware Upgrade Functions and Features DMZ Host supported Universal Plug and Play UPnP supportedVirtual Server supported User-Definable Application Sensing TunnelFront Panel Packing ListPanel Layout 802.1X supportedUSB Reset Decide where to place your Wireless Broadband Router Procedure for Hardware InstallationRear Panel Power on Setup LAN connectionSetup WAN connection Connecting this product with your printerInstall the Software into Your Computers Make Correct Network Settings of Your ComputerPage Page Page Start-up and Log Configuring LevelOne WBR-3404TXStatus Wizard Page Basic Setting Primary Setup WAN Type, Virtual Computers Press Change Dynamic IP Address Static IP AddressPptp PPP over EthernetPage Virtual Computers Press More Dhcp ServerPage Wireless Setting, and 802.1X setting Radius Shared Key 802.1XEncryption Key Length Radius ServerChange Password Forwarding Rules Virtual Server Special AP Non-standard FTP port UPnP SettingMiscellaneous Items IP Address of DMZ HostSecurity Settings Packet Filter Example Inbound FilterThey can do everything block nothing Others are all blocked Example Page Domain Filter Example URL Blocking URL Blocking EnablePage MAC Address Control MAC Address Control tableIP Address ∙ Method VPN setting∙ Max. number of tunnels item ∙ Tunnel nameBasic setup Local subnet ∙VPN Settings IKEFunction of Buttons Remote gateway Local netmaskRemote subnet Remote netmask∙VPN Settings Set IKE Proposal IPSec Proposal index ∙VPN Settings -Set IPSec ProposalEncapsulation protocol IPSec proposal Administrator Time-out Remote Administrator Host/PortDiscard Ping from WAN side Advanced Setting Time Zone System TimeGet Date and Time by NTP Protocol Time ServerSmtp Server IP and Port Mail Alert EnableSystem Log IP Address for SyslogMail Subject Dynamic DNSExample Set Community Snmp SettingEnable Snmp Get CommunityPage Routing Table Page Toolbox You can View system log by clicking the View Log button Firmware Upgrade Reset to default Backup SettingReboot Domain Name or IP address for Ping Test MAC Address for Wake-on-LANPrint Server Configuring on Windows 95/98 PlatformsPage Page Configuring on Windows NT Platforms Configuring on Windows 2000 and XP Platforms Select Ports page, Click Add Port… Page Select Custom, then click Settings… Page Apply your settings Page Configuring on Unix based Platforms Install TCP/IP Protocol into Your PC Appendix a TCP/IP Configuration for Windows 95/98Set TCP/IP Protocol for Working with NAT Router Page Page Don’t input any value in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page