LevelOne WBR-3404TX user manual Miscellaneous Items, IP Address of DMZ Host, Non-standard FTP port

Page 35

4.5.3 Miscellaneous Items

IP Address of DMZ Host

DMZ (DeMilitarized Zone) Host is a host without the protection of firewall. It allows a computer to be exposed to unrestricted 2-way communication for Internet games, Video conferencing, Internet telephony and other special applications.

NOTE: This feature should be used only when needed.

Non-standard FTP port

You have to configure this item if you want to access an FTP server whose port number is not 21. This setting will be lost after rebooting.

UPnP Setting

Allows user to enable or disable UPnP(Universal Plug and Play) function.

35

Image 35

Contents LevelOne Trademarks CopyrightCE Declaration of Conformity FCC Interference StatementTable of Contents Firmware Upgrade Functions and Features DMZ Host supported Universal Plug and Play UPnP supportedVirtual Server supported User-Definable Application Sensing TunnelFront Panel Packing ListPanel Layout 802.1X supportedUSB Reset Rear Panel Procedure for Hardware InstallationDecide where to place your Wireless Broadband Router Power on Setup LAN connectionSetup WAN connection Connecting this product with your printerInstall the Software into Your Computers Make Correct Network Settings of Your ComputerPage Page Page Start-up and Log Configuring LevelOne WBR-3404TXStatus Wizard Page Basic Setting Primary Setup WAN Type, Virtual Computers Press Change Dynamic IP Address Static IP AddressPptp PPP over EthernetPage Virtual Computers Press More Dhcp ServerPage Wireless Setting, and 802.1X setting Radius Shared Key 802.1XEncryption Key Length Radius ServerChange Password Forwarding Rules Virtual Server Special AP Non-standard FTP port UPnP SettingMiscellaneous Items IP Address of DMZ HostSecurity Settings Packet Filter Example Inbound FilterThey can do everything block nothing Others are all blocked Example Page Domain Filter Example URL Blocking URL Blocking EnablePage MAC Address Control IP Address Control tableMAC Address ∙ Method VPN setting∙ Max. number of tunnels item ∙ Tunnel nameFunction of Buttons ∙VPN Settings IKEBasic setup Local subnet Remote gateway Local netmaskRemote subnet Remote netmask∙VPN Settings Set IKE Proposal Encapsulation protocol ∙VPN Settings -Set IPSec ProposalIPSec Proposal index IPSec proposal Discard Ping from WAN side Remote Administrator Host/PortAdministrator Time-out Advanced Setting Time Zone System TimeGet Date and Time by NTP Protocol Time ServerSmtp Server IP and Port Mail Alert EnableSystem Log IP Address for SyslogMail Subject Dynamic DNSExample Set Community Snmp SettingEnable Snmp Get CommunityPage Routing Table Page Toolbox You can View system log by clicking the View Log button Firmware Upgrade Reboot Backup SettingReset to default Domain Name or IP address for Ping Test MAC Address for Wake-on-LANPrint Server Configuring on Windows 95/98 PlatformsPage Page Configuring on Windows NT Platforms Configuring on Windows 2000 and XP Platforms Select Ports page, Click Add Port… Page Select Custom, then click Settings… Page Apply your settings Page Configuring on Unix based Platforms Install TCP/IP Protocol into Your PC Appendix a TCP/IP Configuration for Windows 95/98Set TCP/IP Protocol for Working with NAT Router Page Page Don’t input any value in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page