Global Technology Associates GBWA200501-01 manual Run DHCP?

Page 39

3 – Configuration 35

Run DHCP?

6c. IP Address

You will reach this option if you rejected use of dynamic IP address services. Enter the static IP address and subnet mask of the exter- nal network interface.

The IP address for the external network interface should be a valid ISP-registered IP address if you will be connecting your firewall to the Internet.

7.Network Interface Card for the External, Protected Network or PSN Select an available NIC to assign to the external interface. Use F2 or the SPACE BAR to select from the device list. Each NIC detected on your system is listed at the bottom of the screen with its MAC address.

Note

All networks or sub-networks attached to a firewall interface should be on logically different networks from one another.

Selecting a Network Interface Card

8. Protected Network Interface

Use steps 6b, 6c, and 7 to select DHCP and NIC or assign a static IP address, subnet and NIC for the protected interface. (The protected interface is required: it defines hosts protected by the firewall.)

If you are setting up a new network, GTA recommends choosing network addresses described in RFC 1918. The Internet Assign-

Image 39
Contents GB-Ware Tel +1.407.380.0220 Contents Troubleshooting Features About GTA FirewallsAbout GB-Ware Optional Features Additional Software ProductsAdditional Options for 10-User Version Hardware Specifications Software SpecificationsSystem Requirements Optional Components Memory RecommendationsPPP Hardware Support Options SupportUpgrades About This GuideDocumentation Conventions Mailing List Additional DocumentationGetting Your Activation Code RegistrationRequirements Installing GB-Ware on PC HardwareSetup for GB-Ware Installation Setting the Boot SequenceInstalling the Compact Flash Card Reader or IDE Adapter Using GB-Ware’s Gnat Box Installer Selecting a GB-Ware Runtime Selecting an Installation Disk Installing the Runtime Attaching the Hardware Key Block Completing InstallationInstallation GB-Ware Firewall Product Guide Setting the Boot Sequence Selecting a User InterfaceLoading the Correct Memory Slice Partition Physically Connecting Your GB-Ware Firewall Making a Temporary Peer Network Connection If using the web user interface, you will needGB-Ware Firewall Product Guide Making a Video Connection Making a Serial ConnectionBrowser Compatibility Configuring Your FirewallConfiguration Using a Web Browser On the Network Information section Entering Your Network InformationEntering a Network Configuration Using a Browser Accessing the Firewall Re-configuring Your ComputerConfiguration Using GBAdmin GBAdmin Network Information Window Configuration Using the Serial Console Hardware Configuration Using the Video ConsoleVideo Console Navigation Using the Setup WizardSetup Wizard Run DHCP? Quantity of Addresses Network Class IP Address Range Accessing Your GTA Firewall GB-Ware Firewall Product Guide Frequently Asked Questions FAQ Troubleshooting BasicsWhy cant I see or ping the protected network interface? Hardware Key Block Settings Installation of the USB Key Block Power on the firewall. The following words will display Use these troubleshooting steps My system did not auto-detect the Compact Flash GB-Ware Firewall Product Guide Appendix Installing the Compact Flash CardInstalling the Compact Flash IDE Adapter Assembling the Compact Flash IDE AdapterLocating IDE Controller Ports Mounting the Compact Flash Card Connecting the IDE Cable Connecting the Power SupplyMoving an Old Configuration to GB-Ware Merging Configurations Using GBAdmin FileMerge the GB360.GBcfg using GBAdmin Page GB-Ware Firewall Product Guide Index SymbolsSPP